devel/arduino-irremote: Update to 4.1.1

Changes since 3.7.1:

• Changed Samsung repeat handling. Old handling is available as SamsungLG.
• Added function printIRSendUsage().
• Reduced output size and improved format of printIRResultRawFormatted() to fasten up output (and getting repeats properly decoded).
• Fixed Bug in sendDenonRaw() and improved decodeDenon().
• Fixed potential bug in SendBiphase data for 1 bit.
• Fixed bug in send for RP4020.
• Fixed pin mapping problems especially for Teensy 2.0.
• Added support for decoding of "special" NEC repeats.
• Added SAMD51 support.
• Improved pin mapping for TinyReceiver.
• Improved documentation with the help of [ElectronicsArchiver}(https://github.com/ElectronicsArchiver).
• Added NEC2 protocol.
• Improved Magiquest protocol.
• Renamed sendSamsungRepeat() to sendSamsungLGRepeat().
• Added function sendPulseDistanceWidth().
• Improved repeat detection for some protocols.
• New universal Pulse Distance / Pulse Width decoder added, which covers many previous unknown protocols.
• Printout of code how to send received command by IrReceiver.printIRSendUsage(&Serial).
• RawData type is now 64 bit for 32 bit platforms and therefore decodedIRData.decodedRawData can contain complete frame information for more protocols than with 32 bit as before.
• Callback after receiving a command - call your own code if a message was received.
• Added decoding of PulseDistanceWidth protocols and therfore changed function decodeDistance() to decodeDistanceWidth() and filename ir_DistanceProtocol.hpp to ir_DistanceWidthProtocol.hpp.
• Removed static function printIRSendUsage(), but kept class function printIRSendUsage().
• Changed type of decodedRawData and decodedRawDataArray which is now 64 bit for 32 bit platforms.
• Added receiver callback functionality and registerReceiveCompleteCallback() function.
• Introduced common structure PulseDistanceWidthProtocolConstants.
• Where possible, changed all send and decode functions to use PulseDistanceWidthProtocolConstants.
• Improved MSB/LSB handling
• New convenience fuctions bitreverse32Bit() and bitreverseOneByte().
• Improved Magiquest protocol.
• Fix for #1028 - Prevent long delay caused by overflow when frame duration < repeat period - Thanks to Stephen Humphries!
• Support for ATtiny816 - Thanks to elockman.
• Added Bang&Olufsen protocol. #1030.
• Third parameter of function "void begin(uint_fast8_t aSendPin, bool aEnableLEDFeedback, uint_fast8_t aFeedbackLEDPin)" is not optional anymore and this function is now only available if IR_SEND_PIN is not defined. #1033.
• Fixed bug in sendSony() for command parameter > 0x7F;
• Fixed bug with swapped LG2 header mark and space.
• Disabled strict checks while decoding. They can be enabled by defining DECODE_STRICT_CHECKS.
• Merged the 2 decode pulse width and distance functions.
• Changed macro names _REPEAT_SPACE to _REPEAT_DISTANCE.
• Improved TinyIRReceiver,added FAST protocol for it and added TinyIRSender.hpp and TinySender example, renamed TinyReceiver.h to TinyIR.h.
• Added DISABLE_CODE_FOR_RECEIVER to save program memory and RAM if receiving functionality is not required.
• Extracted protocol functions used by receive and send to IRProtocol.hpp.
• Analyzed Denon code table and therefore changed Denon from MSB to LSB first.
• Renamed sendRC6(aRawData...) to sendRC6Raw( aRawData...).
• Support for seeduino which lacks the print(unsigned long long...) method. Thanks to sklott https://stackoverflow.com/users/11680056/sklott
• Added support for attiny1614 by Joe Ostrander.
• Fixed SEND_PWM_BY_TIMER for ATtiny167 thanks to freskpe.
• Improved SHARP repeat decoding.
• Replaced macros TIMER_EN/DISABLE_RECEIVE_INTR and EN/DISABLE_SEND_PWM_BY_TIMER by functions.
• Added SAMSUNG48 protocol and sendSamsung48() function.
• Fixed bug in printing durations > 64535 in printIRResultRawFormatted().
• Narrowed constraints for RC5 RC6 number of bits.
• Changed the first parameter of printTinyReceiverResultMinimal() to &Serial.
• Removed 3 Serial prints for deprecation warnings to fix #1094.
• Version 1.2.0 of TinyIR. Now FAST protocol with 40 ms period and shorter header space.
• Removed field bool hasStopBit and parameter bool aSendStopBit from PulseDistanceWidthProtocolConstants structure and related functions.
• Changed a lot of unsigned int types to uint16_t types.
• Improved overflow handling.
• Improved software PWM generation.
• Added FAST protocol.
• Improved handling of PULSE_DISTANCE + PULSE_WIDTH protocols.
• New example ReceiveAndSendDistanceWidth.
• Removed the automatic restarting of the receiver timer after sending with SEND_PWM_BY_TIMER enabled.
• Split ISR into ISR and function IRPinChangeInterruptHandler().
• Added functions addTicksToInternalTickCounter() and addMicrosToInternalTickCounter().
• SAMD51 use timer3 if timer5 not available.
• Disabled #define LOCAL_DEBUG in IRReceive.hpp, which was accidently enabled at 4.1.0.

Reported by: portscout