Page MenuHomeFreeBSD
Files F109405051

D33469.diff
No OneTemporary
Actions

D33469.diff
View Options

Index: sbin/Makefile.i386
===================================================================
--- sbin/Makefile.i386
+++ sbin/Makefile.i386
@@ -2,4 +2,3 @@
SUBDIR += bsdlabel
SUBDIR += fdisk
-SUBDIR += sconfig
Index: sbin/sconfig/Makefile
===================================================================
--- sbin/sconfig/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# Cronyx Id: sbin.sconfig.Makefile,v 1.1.4.1 2003/02/17 12:51:24 rik Exp $
-# $FreeBSD$
-
-PACKAGE=runtime
-PROG= sconfig
-MAN= sconfig.8
-WARNS?= 2
-CFLAGS+= -I${SRCTOP}/sys/dev/cp
-
-.include <bsd.prog.mk>
Index: sbin/sconfig/Makefile.depend
===================================================================
--- sbin/sconfig/Makefile.depend
+++ /dev/null
@@ -1,15 +0,0 @@
-# $FreeBSD$
-# Autogenerated - do NOT edit!
-
-DIRDEPS = \
- include \
- include/xlocale \
- lib/${CSU_DIR} \
- lib/libc \
-
-
-.include <dirdeps.mk>
-
-.if ${DEP_RELDIR} == ${_DEP_RELDIR}
-# local dependencies - needed for -jN in clean tree
-.endif
Index: sbin/sconfig/sconfig.8
===================================================================
--- sbin/sconfig/sconfig.8
+++ /dev/null
@@ -1,608 +0,0 @@
-.\" Copyright (c) 2002-2004 Roman Kurakin <rik@cronyx.ru>
-.\" Copyright (c) 2002-2004 Cronyx Engineering
-.\" All rights reserved.
-.\"
-.\" This software is distributed with NO WARRANTIES, not even the implied
-.\" warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-.\"
-.\" Authors grant any other persons or organisations a permission to use,
-.\" modify and redistribute this software in source and binary forms,
-.\" as long as this message is kept with the software, all derivative
-.\" works or modified versions.
-.\"
-.\" $FreeBSD$
-.Dd October 3, 2016
-.Dt SCONFIG 8 i386
-.Os
-.Sh NAME
-.Nm sconfig
-.Nd "channel configuration utility for Cronyx adapters"
-.Sh SYNOPSIS
-.Nm
-.Op Fl aimsxeftuc
-.Op Ar device
-.Op Ar data_rate_options
-.Op Ar protocol_options ...
-.Op Ar interface_options ...
-.Sh DESCRIPTION
-The
-.Nm
-utility is used for configuring the channel options of the Cronyx
-adapters.
-In asynchronous mode, all parameters should be set using the standard
-.Xr stty 1
-utility.
-With
-.Nm ,
-it is only possible to set some of them (see below).
-.Pp
-Some of the options can be set only on free channels,
-that is when the corresponding network interface is in the
-.Cm down
-state in the synchronous mode,
-and the terminal device
-.Pa /dev/tty*
-is closed in asynchronous mode.
-.Pp
-Other channel options can be changed
-.Dq "on the fly" .
-Generally, the channel options are set up during the operating system startup,
-for example, from the
-.Pa /etc/rc
-script.
-.Pp
-Note that not all options make sense in every particular case,
-and an attempt to set some of them may hung up the channel
-or the whole adapter.
-.\"--------------------------------------------------------------
-.Ss "Information Options"
-Only one of these options can be specified.
-If information option is specified,
-.Nm
-will show the corresponding information and will ignore all other options,
-except
-.Ar device .
-See also the description of the
-.Ar device
-argument.
-.Bl -tag -width indent
-.It <none>
-This will show settings of the channel.
-.It Fl a
-Print all settings of the channel.
-.It Fl i
-Print interface settings, equal to the output of the
-.Xr ifconfig 8
-utility.
-.It Fl m
-Print modem signal status.
-The description of all signals can be found in any modem documentation.
-Only LE signal should be described.
-If this signal is ON then the channel is busy.
-If it is OFF then the channel is free.
-.It Fl s
-Print brief channel statistics.
-This is the generic statistics,
-see also the
-.Fl x , e , f , t ,
-and
-.Fl u
-options.
-For a description of the output, see below.
-.Pp
-This statistics is very useful if something goes wrong.
-For example, if all interrupt counters are zero then the device
-was configured to use an interrupt that was not registered in the
-BIOS for use with the ISA bus.
-.It Fl x
-Print full channel statistics.
-This options prints additional counters,
-but with less precision than with the
-.Fl s
-option.
-.It Fl e
-Print brief E1/G703 statistics.
-If this option is selected, the
-statistics accumulated over the last 15 minutes is printed.
-For a description of the output, see below.
-.It Fl f
-Print full E1/G703 statistics.
-This option shows all E1/G703 statistics that the
-.Fl e
-option shows,
-plus total statistics for the whole period of time and statistics for
-last 24 hours (if available).
-For a description of the output, see below.
-.It Fl t
-Print brief E3/T3/STS-1 statistics.
-If this option is selected, the
-statistics accumulated over the last 15 minutes is printed.
-For a description of the output, see below.
-.It Fl u
-Print full E3/T3/STS-1 statistics.
-This option shows all E3/T3/STS-1 statistics that the
-.Fl t
-option shows,
-plus total statistics for the whole period of time and statistics for
-last 24 hours (if available).
-For a description of the output, see below.
-.It Fl c
-Cleans all kind of statistics.
-.El
-.\"--------------------------------------------------------------
-.Ss "Device Selection"
-The device is selected using the name of the network interface,
-as shown by
-.Xr ifconfig 8 .
-The channel number depends on the order the drivers were loaded into the system.
-Sometimes people confuse channel number and adapter number because of the
-same spelling.
-The adapter number appears in the kernel context, while the channel number
-is in the configuration context.
-.Bl -tag -width indent
-.It <none>
-If the device name is omitted,
-.Nm
-will print information about all channels of all Cronyx adapters
-available in the system.
-If some settings need to be made, the device name must be specified.
-.It Li cx Ns Ar ##
-This is the channel name for the Sigma family of Cronyx adapters.
-(ISA bus.)
-.It Li ct Ns Ar ##
-This is the channel name for the Tau family of Cronyx adapters.
-(ISA bus.)
-.It Li cp Ns Ar ##
-This is the channel name for the Tau-PCI family of Cronyx adapters.
-(PCI bus.)
-.It Li ce Ns Ar ##
-This is the channel name for the Tau32-PCI family of Cronyx adapters.
-(PCI bus.)
-.El
-.\"--------------------------------------------------------------
-.Ss "Data Rate Options"
-.Bl -tag -width indent
-.It Ar value
-A non-zero value will set the data rate to a given value
-in asynchronous mode,
-and will set the data rate and internal clock source of synchronization
-in synchronous mode.
-A zero value is equivalent to specifying the
-.Cm extclock
-option.
-The transmitted data (TxD) are synchronized using the internal on-board timing
-generator, the internally generated timing signal is driven on the TXCOUT pin,
-and the signal on the TXCIN pin is ignored.
-This mode is used for direct
-terminal-to-terminal communication, e.g., when connecting two computers together
-in synchronous mode with a relatively short cable.
-This method should also be
-used for testing channels with an external loopback connector.
-.It Cm extclock
-Set the external timing clock source for synchronous channels.
-External clock mode is the most commonly used method for connecting
-external modem hardware.
-In this mode,
-the external timing signal is received on the TXCIN pin of the connector,
-and it is used as a synchronization clock for transmitting data (TxD).
-.Pp
-Note: in
-.Cm extclock
-mode, the device cannot determine the value of the external timing clock
-since it does not have the built-in clock gauge.
-.El
-.\"--------------------------------------------------------------
-.Ss "Protocol Options"
-Note: these option can only be used on a free channel, and they require
-specifying the device name.
-.Bl -tag -width indent
-.It Cm async
-(Only for Sigma family.)
-Select the asynchronous protocol (or mode).
-In this mode, Cronyx adapters behave as normal serial devices,
-and standard serial communications utilities can be used to
-work with them.
-All asynchronous settings should be set using the standard
-serial communications configuration utilities, e.g.,
-.Xr stty 1 .
-With
-.Nm ,
-it is only possible to set some of them.
-.It Cm cisco
-Select the Cisco HDLC synchronous protocol.
-.It Cm fr
-Select the Frame Relay synchronous protocol
-.Tn ( ANSI
-T1.617 Annex D).
-.It Cm ppp
-Select the synchronous PPP protocol.
-.It Sm Cm keepalive No = Bro Cm on , off Brc Sm
-Turn on/off transmission of keepalive messages.
-This option is used only for synchronous PPP.
-If this option is
-.Cm on ,
-PPP will periodically send ECHO-REQUEST messages.
-If it will not receive any ECHO-REPLY messages for
-some (definite) period of time it will break the connection.
-It is used for tracking the line state.
-.It Cm idle
-This mode is reported when using Netgraph.
-An actual protocol depends on the type of a connected Netgraph node,
-and it cannot be changed with
-.Nm .
-.El
-.\"--------------------------------------------------------------
-.Ss "Interface Options"
-Not all of these options can be set on a busy channel, and not all of them
-are applicable to all kinds of adapters/channels.
-For all dual-state options,
-.Cm off
-is the default value.
-None of these options can be used in the asynchronous mode,
-except for the
-.Cm debug
-option.
-.Bl -tag -width indent
-.It Sm Cm port No = Bro Cm rs232 , v35 , rs449 Brc Sm
-Set the port type for old Sigma models.
-.It Sm Cm cfg No = Bro Cm A , B , C Brc Sm
-Set the configuration for the adapter.
-This option can be used only with Tau/E1
-and Tau/G703 adapters, and only if all channels are free.
-.Bl -tag -width ".Cm cfg Ns = Ns Cm A"
-.It Cm cfg Ns = Ns Cm A
-Two independent E1/G703 channels.
-This is the default setting.
-.It Cm cfg Ns = Ns Cm B
-(Only for ISA models.)
-For Tau/G703 this means one G703 channel and one digital channel.
-For Tau/E1, the first physical channel is divided into two subchannels.
-One of them goes to the first logical channel, another one goes to the
-second physical channel.
-Second (logical) channel is the digital channel.
-.It Cm cfg Ns = Ns Cm C
-(Only for E1 models.)
-In this mode, first
-physical channel consists of three data flows.
-Two of them go to the two (logical) channels.
-The last one goes to the second physical channel.
-On newer models (Tau32-PCI, Tau-PCI/2E1 and Tau-PCI/4E1),
-this programs the hardware to use a single source of synchronization
-and pass all unused (in both channels) timeslots from
-one channel to another.
-.El
-.Pp
-For a detailed description of available configuration modes,
-see the adapter documentation.
-This option cannot be set on a busy channel.
-.It Sm Cm loop No = Bro Cm on , off Brc Sm
-Turn on/off internal loopback.
-This mode is useful for debugging.
-When this mode is
-.Cm on ,
-some data should be sent.
-If no interrupts are generated, chances are that
-the corresponding IRQ configuration entry in the BIOS
-was not switched from
-.Dq Li "PCI/ISA PNP"
-to
-.Dq Li "Legacy ISA" .
-.It Sm Cm rloop No = Bro Cm on , off Brc Sm
-(Only for Tau32-PCI and Tau-PCI/E3.)
-Turn on/off remote loopback feature.
-This mode is also useful for debugging.
-.It Sm Cm dpll No = Bro Cm on , off Brc Sm
-Turn on/off digital phase locked loop mode (DPLL).
-When enabled, the receiver
-timing clock signal is derived from the received data.
-Must be used with the NRZI
-encoding to avoid the synchronization loss.
-.It Sm Cm nrzi No = Bro Cm on , off Brc Sm
-Turn on/off NRZI encoding.
-If
-.Cm off ,
-NRZ encoding is used.
-.Bl -tag -width "NRZI"
-.It NRZ
-The zero bit is transmitted by the zero signal level,
-the one bit is transmitted by the positive signal level.
-.It NRZI
-The zero bit is transmitted by the change of the signal
-level, the one bit is by the constant signal level.
-Commonly used with the
-.Cm dpll Ns = Ns Cm on
-option.
-.El
-.It Sm Cm invclk No = Bro Cm on , off Brc Sm
-(Tau and Tau-PCI only.)
-Invert both the transmit and receive clock signals.
-.It Sm Cm invrclk No = Bro Cm on , off Brc Sm
-(Tau-PCI only.)
-Invert the receive clock signals.
-.It Sm Cm invtclk No = Bro Cm on , off Brc Sm
-(Tau-PCI only.)
-Invert the transmit clock signals.
-.It Sm Cm higain No = Bro Cm on , off Brc Sm
-(E1 only.)
-In off state the sensitivity is -12 dB.
-Turn on/off increasing the E1 receiver's non-linear sensitivity to -30dB.
-This allows increasing of the line distance.
-.It Sm Cm cablen No = Bro Cm on , off Brc Sm
-(Tau-PCI/T3 and Tau-PCI/STS-1 only.)
-Turn on/off adjusting of the transmit signal for a long cable T3/STS-1.
-.It Sm Cm monitor No = Bro Cm on , off Brc Sm
-(Tau32-PCI, Tau-PCI/2E1 and Tau-PCI/4E1 only.)
-Turn on/off increasing of the E1 receiver's linear sensitivity to -30dB.
-This can be used for the interception purposes.
-.It Sm Cm phony No = Bro Cm on , off Brc Sm
-(Tau32-PCI and Tau-PCI E1 family only.)
-Turn on/off the so-called
-.Dq phony
-mode.
-This mode allows
-receiving raw CEPT frames from the E1 line.
-Raw frames can be accessed, for example, with the raw protocol.
-Packets would come at a rate of 500 frames per second
-with length
-.No 16* Ns Ar N
-(for Tau-PCI/E1 model), where
-.Ar N
-is the number of timeslots.
-For
-Tau-PCI/2E1 and Tau-PCI/4E1,
-.Ar N
-should be equal to 32 regardless of the number of
-used timeslots.
-.It Sm Cm unfram No = Bro Cm on , off Brc Sm
-(Tau32-PCI, Tau-PCI/2E1 and Tau-PCI/4E1 only.)
-Turn on/off unframed mode.
-.Bl -tag -width ".Cm unfram Ns = Ns Cm off"
-.It Cm unfram Ns = Ns Cm on
-Switch channel to the unframed G.703 mode.
-.It Cm unfram Ns = Ns Cm off
-Switch channel to the framed E1 (G.704) mode.
-.El
-.It Sm Cm scrambler No = Bro Cm on , off Brc Sm
-(Tau32-PCI, Tau-PCI/G.703, Tau-PCI/2E1, and
-Tau-PCI/4E1 in unframed mode only.)
-Turn on/off scrambling of the G.703 data.
-.It Sm Cm use16 No = Bro Cm on , off Brc Sm
-(Tau32-PCI and Tau-PCI E1 family only.)
-Turn on/off the usage of the 16th timeslot for data transmission.
-Normally, the 16th timeslot is used for signalling information
-(multiframing CAS).
-.It Sm Cm crc4 No = Bro Cm on , off Brc Sm
-(E1 only.)
-Turn on/off CRC4 superframe mode.
-.It Sm Cm syn No = Bro Cm int , rcv , rcv0 , rcv1 , rcv2 , rcv3 Brc Sm
-.Bl -tag -width ".Cm rcv3"
-.It Cm int
-Use an internal clock generator for G703 transmitter
-(clock master).
-.It Cm rcv
-Use the G703 receiver data clock as the transmit clock
-(clock slave).
-.It Cm rcv0 , rcv1 , rcv2 , rcv3
-Use the G703 receiver clock of the other channel
-(E1 models only).
-.El
-.It Cm dir Ns = Ns Ar number
-(Tau32-PCI, Tau-PCI/2E1 and Tau-PCI/4E1 only.)
-Bind a logical channel to a physical channel.
-Using this parameter it is possible, for example, to split
-physical E1 channel into several logical channels.
-.It Cm ts Ns = Ns Ar interval
-(E1 only.)
-Set up the list of timeslots for use by the channel.
-The timeslots are numbered from 1 to 31,
-and are separated by a comma or a minus sign,
-giving an interval.
-Example:
-.Dq Li ts=1-3,5,17 .
-.It Cm pass Ns = Ns Ar interval
-(Tau/E1 only.)
-Set up the list of timeslots, translated to the E1 subchannel in
-.Cm cfg Ns = Ns Cm B
-and
-.Cm cfg Ns = Ns Cm C
-configurations.
-.It Sm Cm debug No = Bro Cm 0 , 1 , 2 Brc Sm
-Turn on/off debug messages.
-.Bl -tag -width 2n
-.It Cm 0
-Turn debug messages off.
-.It Cm 1
-Turn debug messages on, equivalent to the
-.Cm debug
-option of the
-.Xr ifconfig 8
-utility.
-.It Cm 2
-High intensive debug messages, for developers only.
-.El
-.El
-.\"--------------------------------------------------------------
-.Sh EXAMPLES
-Set up channel 1 for use with the HDSL modem or any other
-synchronous leased-line modem, and PPP/HDLC protocol (for Sigma):
-.Bd -literal -offset indent
-sconfig cx1 ppp extclock
-ifconfig cx1 158.250.244.2 158.250.244.1 up
-.Ed
-.Pp
-Set up channel 0 of Tau/E1 for use with the Cisco protocol
-over the E1 link, with a single virtual connection.
-The DLCI number is detected automatically.
-Use timeslots 1-10:
-.Bd -literal -offset indent
-sconfig ct0 cisco ts=1-10
-ifconfig ct0 158.250.244.2 158.250.244.1 up
-.Ed
-.Pp
-Set up channel 0 for the synchronous null-modem link to the nearby computer,
-internal clock source, 256000 bits/sec, protocol Cisco/HDLC (for Tau):
-.Bd -literal -offset indent
-sconfig ct0 cisco 256000
-ifconfig ct0 200.1.1.1 200.1.1.2 up
-.Ed
-.Pp
-Set up channel 1 for the leased line link using the data-only
-null-modem cable (or modems like Zelax+ M115).
-Synchronous DPLL mode, 128000
-bits/sec, protocol PPP/HDLC, NRZI encoding (for Sigma):
-.Bd -literal -offset indent
-sconfig cx1 ppp 128000 nrzi=on dpll=on
-ifconfig cx1 158.250.244.2 158.250.244.1 up
-.Ed
-.\"--------------------------------------------------------------
-.Sh DIAGNOSTICS
-This section contains a description of abbreviations used by
-.Nm
-while displaying various statistics.
-For a description of options related to
-statistics, please see above.
-.\"--------------------------------------------------------------
-.Ss Statistics
-When running, the driver gathers statistics about the channels, which
-can be accessed using the
-.Nm
-utility,
-or through the
-.Xr ioctl 2
-call
-.Dv SERIAL_GETSTAT .
-.Pp
-.Bl -tag -width indent -compact
-.It Va Rintr
-Total number of receive interrupts.
-.It Va Tintr
-Total number of transmit interrupts.
-.It Va Mintr
-Total number of modem interrupts.
-.It Va Ibytes
-Total bytes received.
-.It Va Ipkts
-Total packets received (for HDLC mode).
-.It Va Ierrs
-Number of receive errors.
-.It Va Obytes
-Total bytes transmitted.
-.It Va Opkts
-Total packets transmitted (for HDLC mode).
-.It Va Oerrs
-Number of transmit errors.
-.El
-.\"--------------------------------------------------------------
-.Ss E1/G.703 Statistics
-For E1 and G.703 channels, the SNMP-compatible statistics data are gathered
-(see RFC 1406).
-It can be accessed using the
-.Nm
-utility,
-or through the
-.Xr ioctl 2
-call
-.Dv SERIAL_GETESTAT .
-.Bl -tag -width ".Va RCRC Pq Va rcrce"
-.It Va Unav Pq Va uas
-Unavailable seconds: receiving all ones, loss of carrier, or loss of
-signal.
-.It Va Degr Pq Va dm
-Degraded minutes: having error rate more than 10E-6, not counting unavailable
-and severely errored seconds.
-.It Va Bpv Pq Va bpv
-HDB3 bipolar violation errors.
-.It Va Fsyn Pq Va fse
-Frame synchronization errors (E1 only).
-.It Va CRC Pq Va crce
-CRC4 errors (E1).
-.It Va RCRC Pq Va rcrce
-Remote CRC4 errors: E-bit counter (E1).
-.It Va Err Pq Va es
-Errored seconds: any framing errors, or out of frame sync, or any slip events.
-.It Va Lerr Pq Va les
-Line errored seconds: any BPV.
-.It Va Sev Pq Va ses
-Severely errored seconds: 832 or more framing errors, or 2048 or more bipolar
-violations.
-.It Va Bur Pq Va bes
-Bursty errored seconds: more than 1 framing error, but not severely errored.
-.It Va Oof Pq Va oofs
-Severely errored framing seconds: out of frame sync.
-.It Va Slp Pq Va css
-Controlled slip seconds: any slip buffer overflow or underflow.
-.El
-.\"--------------------------------------------------------------
-.Ss E1/G.703 Status
-The
-.Nm
-utility also prints the E1/G.703 channel status.
-The status can have the
-following values (non-exclusive):
-.Pp
-.Bl -tag -width ".Li FARLOMF" -compact
-.It Li Ok
-The channel is in a valid state, synchronized.
-.It Li LOS
-Loss of sync.
-.It Li AIS
-Receiving unframed all ones (E1 only).
-.It Li LOF
-Loss of framing (E1 only).
-.It Li LOMF
-Loss of multiframing (E1 only).
-.It Li FARLOF
-Receiving remote alarm (E1 only).
-.It Li AIS16
-Receiving all ones in the timeslot 16 (E1 only).
-.It Li FARLOMF
-Receiving distant multiframe alarm (E1 only).
-.It Li TSTREQ
-Receiving test request code (G.703 only).
-.It Li TSTERR
-Test error (G.703 only).
-.El
-.\"--------------------------------------------------------------
-.Sh SEE ALSO
-.Xr stty 1 ,
-.Xr ioctl 2 ,
-.Xr ifconfig 8 ,
-.Xr route 8 ,
-.\"--------------------------------------------------------------
-.Sh HISTORY
-The
-.Nm
-utility appeared in
-.Fx 5.2 .
-The
-.Nm
-utility is a replacement for the
-.Nm cxconfig
-and
-.Nm ctconfig
-utilities that were used in the past with
-.Fx
-drivers.
-Those two utilities and
-.Nm
-are not compatible,
-and therefore all scripts using them have to be rewritten.
-Moreover,
-.Tn Linux
-and
-.Fx
-versions of the
-.Nm
-utility are not fully compatible.
-.\"--------------------------------------------------------------
-.Sh AUTHORS
-.An Cronyx Engineering Aq Mt info@cronyx.ru
-.Pp
-.Pa http://www.cronyx.ru
-.\"--------------------------------------------------------------
-.Sh BUGS
-All software produced by Cronyx Engineering is thoroughly tested.
-But as created by a man, it can contain some bugs.
-If you have caught one, try to localize it and send an email with the
-description of the bug, and all operations that you have done.
-We will try to reproduce the error and fix it.
Index: sbin/sconfig/sconfig.c
===================================================================
--- sbin/sconfig/sconfig.c
+++ /dev/null
@@ -1,1212 +0,0 @@
-/*
- * Channel configuration utility for Cronyx serial adapters.
- *
- * Copyright (C) 1997-2002 Cronyx Engineering.
- * Author: Serge Vakulenko, <vak@cronyx.ru>
- *
- * Copyright (C) 1999-2005 Cronyx Engineering.
- * Author: Roman Kurakin, <rik@cronyx.ru>
- *
- * This software is distributed with NO WARRANTIES, not even the implied
- * warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Authors grant any other persons or organisations permission to use
- * or modify this software as long as this message is kept with the software,
- * all derivative works or modified versions.
- *
- * Cronyx Id: sconfig.c,v 1.4.2.2 2005/11/09 13:01:35 rik Exp $
- */
-
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD$");
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <ctype.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include "cserial.h"
-
-#define MAXCHAN 128
-
-int vflag, eflag, sflag, mflag, cflag, fflag, iflag, aflag, xflag;
-int tflag, uflag;
-char mask[64];
-int adapter_type; /* 0-sigma, 1-tau, 2-taupci, 3-tau32 */
-char chan_name[16];
-
-static void
-usage (void)
-{
- printf(
-"Serial Adapter Configuration Utility\n"
-"Copyright (C) 1998-2005 Cronyx Engineering.\n"
-"See also man sconfig (8)\n"
-"Usage:\n"
-"\tsconfig [-aimsxeftuc] [device [parameters ...]]\n"
-"\n"
-"Options:\n"
-"\t<no options>\t\t -- print channel options\n"
-"\t-a\t\t\t -- print all settings of the channel\n"
-"\t-i\t\t\t -- print network interface status\n"
-"\t-m\t\t\t -- print modem signal status\n"
-"\t-s\t\t\t -- print channel statistics\n"
-"\t-x\t\t\t -- print extended channel statistics\n"
-"\t-e\t\t\t -- print short E1/G703 statistics\n"
-"\t-f\t\t\t -- print full E1/G703 statistics\n"
-"\t-t\t\t\t -- print short E3/T3/STS-1 statistics\n"
-"\t-u\t\t\t -- print full E3/T3/STS-1 statistics\n"
-"\t-c\t\t\t -- clear statistics\n"
-"\nParameters:\n"
-"\t<number>\t\t -- baud rate, internal clock\n"
-"\textclock\t\t -- external clock (default)\n"
-"\nProtocol options:\n"
-"\tasync\t\t\t -- asynchronous protocol\n"
-#ifdef __linux__
-"\tsync\t\t\t -- synchronous protocol\n"
-#endif
-"\tcisco\t\t\t -- Cisco/HDLC protocol\n"
-"\tfr\t\t\t -- Frame Relay protocol\n"
-#ifdef __linux__
-"\t dlci<number>\t -- Add new DLCI\n"
-#endif
-"\tppp\t\t\t -- PPP protocol\n"
-#ifdef __linux__
-"\trbrg\t\t\t -- Remote bridge\n"
-"\traw\t\t\t -- raw HDLC protocol\n"
-"\tpacket\t\t\t -- packetized HDLC protocol\n"
-"\tidle\t\t\t -- no protocol\n"
-#else
-"\t keepalive={on,of}\t -- Enable/disable keepalive\n"
-#endif
-"\nInterface options:\n"
-"\tport={rs232,v35,rs449}\t -- port type (for old models of Sigma)\n"
-"\tcfg={A,B,C}\t\t -- adapter configuration\n"
-"\tloop={on,off}\t\t -- internal loopback\n"
-"\trloop={on,off}\t\t -- remote loopback\n"
-"\tdpll={on,off}\t\t -- DPLL mode\n"
-"\tnrzi={on,off}\t\t -- NRZI encoding\n"
-"\tinvclk={on,off}\t\t -- invert receive and transmit clock\n"
-"\tinvrclk={on,off}\t -- invert receive clock\n"
-"\tinvtclk={on,off}\t -- invert transmit clock\n"
-"\thigain={on,off}\t\t -- E1 high non linear input sensitivity \n\t\t\t\t (long line)\n"
-"\tmonitor={on,off}\t -- E1 high linear input sensitivity \n\t\t\t\t (interception mode)\n"
-"\tphony={on,off}\t\t -- E1 telepnony mode\n"
-"\tunfram={on,off}\t\t -- E1 unframed mode\n"
-"\tscrambler={on,off}\t -- G.703 scrambling mode\n"
-"\tuse16={on,off}\t\t -- E1 timeslot 16 usage\n"
-"\tcrc4={on,off}\t\t -- E1 CRC4 mode\n"
-#ifdef __linux__
-"\tami={on,off}\t\t -- E1 AMI or HDB3 line code\n"
-"\tmtu={size}\t\t -- set MTU in bytes\n"
-#endif
-"\tsyn={int,rcv,rcvX}\t -- G.703 transmit clock\n"
-"\tts=...\t\t\t -- E1 timeslots\n"
-"\tpass=...\t\t -- E1 subchannel timeslots\n"
-"\tdir=<num>\t\t -- connect channel to link<num>\n"
-/*"\trqken={size}\t\t -- set receive queue length in packets\n"*/
-/*"\tcablen={on,off}\t\t -- T3/STS-1 high transmitter output for long cable\n"*/
-"\tdebug={0,1,2}\t\t -- enable/disable debug messages\n"
- );
- exit (0);
-}
-
-static unsigned long
-scan_timeslots (char *s)
-{
- char *e;
- long v;
- int i;
- unsigned long ts, lastv;
-
- ts = lastv = 0;
- for (;;) {
- v = strtol (s, &e, 10);
- if (e == s)
- break;
- if (*e == '-') {
- lastv = v;
- s = e+1;
- continue;
- }
- if (*e == ',')
- ++e;
-
- if (lastv)
- for (i=lastv; i<v; ++i)
- ts |= 1L << i;
- ts |= 1L << v;
-
- lastv = 0;
- s = e;
- }
- return ts;
-}
-
-static int
-ppp_ok (void)
-{
-#ifdef __linux__
- int s, p;
- struct ifreq ifr;
- char pttyname[32];
- char *p1, *p2;
- int i, j;
- int ppp_disc = N_PPP;
-
- /*
- * Open a socket for doing the ioctl operations.
- */
- s = socket (AF_INET, SOCK_DGRAM, 0);
- if (s < 0) {
- fprintf (stderr, "Error opening socket.\n");
- return 0;
- }
- strncpy (ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
- if (ioctl (s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0) {
- /* Ok. */
- close (s);
- return 1;
- }
- close (s);
-
- /* open pseudo-tty and try to set PPP discipline */
- sprintf (pttyname, "/dev/ptyXX");
- p1 = &pttyname[8];
- p2 = &pttyname[9];
- for (i=0; i<16; i++) {
- struct stat stb;
-
- *p1 = "pqrstuvwxyzabcde"[i];
- *p2 = '0';
- if (stat (pttyname, &stb) < 0)
- continue;
- for (j=0; j<16; j++) {
- *p2 = "0123456789abcdef"[j];
- p = open (pttyname, 2);
- if (p > 0) {
- if (ioctl (p, TIOCSETD, &ppp_disc) < 0) {
- fprintf (stderr, "No PPP discipline in kernel.\n");
- close (p);
- return 0;
- }
- close (p);
- return 1;
- }
- }
- }
- fprintf (stderr, "Cannot get pseudo-tty.\n");
- return 0;
-#else
- return 1;
-#endif
-}
-
-static char *
-format_timeslots (unsigned long s)
-{
- static char buf [100];
- char *p = buf;
- int i;
-
- for (i=1; i<32; ++i)
- if ((s >> i) & 1) {
- int prev = (i > 1) & (s >> (i-1));
- int next = (i < 31) & (s >> (i+1));
-
- if (prev) {
- if (next)
- continue;
- *p++ = '-';
- } else if (p > buf)
- *p++ = ',';
-
- if (i >= 10)
- *p++ = '0' + i / 10;
- *p++ = '0' + i % 10;
- }
- *p = 0;
- return buf;
-}
-
-static void
-print_modems (int fd, int need_header)
-{
- int status;
-
- if (ioctl (fd, TIOCMGET, &status) < 0) {
- perror ("getting modem status");
- return;
- }
- if (need_header)
- printf ("Channel\tLE\tDTR\tDSR\tRTS\tCTS\tCD\n");
- printf ("%s\t%s\t%s\t%s\t%s\t%s\t%s\n", chan_name,
- status & TIOCM_LE ? "On" : "-",
- status & TIOCM_DTR ? "On" : "-",
- status & TIOCM_DSR ? "On" : "-",
- status & TIOCM_RTS ? "On" : "-",
- status & TIOCM_CTS ? "On" : "-",
- status & TIOCM_CD ? "On" : "-");
-}
-
-static void
-#ifdef __linux__
-print_ifconfig (int fd)
-#else
-print_ifconfig (int fd __unused)
-#endif
-{
- char buf [64];
-#ifdef __linux__
- char protocol [8];
-
- if (ioctl (fd, SERIAL_GETPROTO, &protocol) >= 0 &&
- strcmp (protocol, "fr") == 0)
- sprintf (buf, "ifconfig %sd16 2>/dev/null", chan_name);
- else
-#endif
- sprintf (buf, "ifconfig %s 2>/dev/null", chan_name);
- system (buf);
-}
-
-static void
-set_debug_ifconfig (int on)
-{
- char buf [64];
- sprintf (buf, "ifconfig %s %sdebug 2>/dev/null", chan_name,
- on ? "" : "-");
- system (buf);
-}
-
-static char *
-format_long (unsigned long val)
-{
- static char s[32];
- int l;
- l = sprintf (s, "%lu", val);
- if (l>7 && !sflag) {
- s[3] = s[2];
- s[2] = s[1];
- s[1] = '.';
- s[4] = 'e';
- sprintf (s + 5, "%02d", l-1);
- }
- return s;
-}
-
-static void
-print_stats (int fd, int need_header)
-{
- struct serial_statistics st;
- unsigned long sarr [9];
- int i;
-
- if (ioctl (fd, SERIAL_GETSTAT, &st) < 0) {
- perror ("getting statistics");
- return;
- }
- if (need_header) {
- if (sflag) {
- printf (" ------------Receive----------- "
- "------------Transmit----------\n");
- printf ("Channel Interrupts Packets Errors "
- "Interrupts Packets Errors\n");
- }
- else {
- printf (" --------Receive--------------- "
- "--------Transmit-------------- Modem\n");
- printf ("Channel Intrs Bytes Packets Errors "
- "Intrs Bytes Packets Errors Intrs\n");
- }
- }
-
- sarr [0] = st.rintr;
- sarr [1] = st.ibytes;
- sarr [2] = st.ipkts;
- sarr [3] = st.ierrs;
- sarr [4] = st.tintr;
- sarr [5] = st.obytes;
- sarr [6] = st.opkts;
- sarr [7] = st.oerrs;
- sarr [8] = st.mintr;
- printf ("%s", chan_name);
- if (sflag) {
- printf ("\t%-12lu%-12lu%-12lu%-12lu%-12lu%-12lu", sarr[0],
- sarr[2], sarr[3], sarr[4], sarr[6], sarr[7]);
- } else {
- for (i = 0; i < 9; i++)
- printf ("\t%s", format_long (sarr [i]));
- printf ("\n");
- }
-}
-
-static void
-clear_stats (int fd)
-{
- if (ioctl (fd, SERIAL_CLRSTAT, 0) < 0) {
- perror ("clearing statistics");
- exit (-1);
- }
-}
-
-static char *
-format_e1_status (unsigned long status)
-{
- static char buf [80];
-
- if (status == 0)
- return "n/a";
- if (status & E1_NOALARM)
- return "Ok";
- buf[0] = 0;
- if (status & E1_LOS) strcat (buf, ",LOS");
- if (status & E1_AIS) strcat (buf, ",AIS");
- if (status & E1_LOF) strcat (buf, ",LOF");
- if (status & E1_LOMF) strcat (buf, ",LOMF");
- if (status & E1_CRC4E) strcat (buf, ",CRC4E");
- if (status & E1_FARLOF) strcat (buf, ",FARLOF");
- if (status & E1_AIS16) strcat (buf, ",AIS16");
- if (status & E1_FARLOMF) strcat (buf, ",FARLOMF");
-/* if (status & E1_TSTREQ) strcat (buf, ",TSTREQ");*/
-/* if (status & E1_TSTERR) strcat (buf, ",TSTERR");*/
- if (buf[0] == ',')
- return buf+1;
- return "Unknown";
-}
-
-static void
-print_frac (int leftalign, unsigned long numerator, unsigned long divider)
-{
- int n;
-
- if (numerator < 1 || divider < 1) {
- printf (leftalign ? "/- " : " -");
- return;
- }
- n = (int) (0.5 + 1000.0 * numerator / divider);
- if (n < 1000) {
- printf (leftalign ? "/.%-3d" : " .%03d", n);
- return;
- }
- putchar (leftalign ? '/' : ' ');
-
- if (n >= 1000000) n = (n+500) / 1000 * 1000;
- else if (n >= 100000) n = (n+50) / 100 * 100;
- else if (n >= 10000) n = (n+5) / 10 * 10;
-
- switch (n) {
- case 1000: printf (".999"); return;
- case 10000: n = 9990; break;
- case 100000: n = 99900; break;
- case 1000000: n = 999000; break;
- }
- if (n < 10000) printf ("%d.%d", n/1000, n/10%100);
- else if (n < 100000) printf ("%d.%d", n/1000, n/100%10);
- else if (n < 1000000) printf ("%d.", n/1000);
- else printf ("%d", n/1000);
-}
-
-static void
-print_e1_stats (int fd, int need_header)
-{
- struct e1_statistics st;
- int i, maxi;
-
- if (need_header)
- printf ("Chan\t Unav/Degr Bpv/Fsyn CRC/RCRC Err/Lerr Sev/Bur Oof/Slp Status\n");
-
- if (ioctl (fd, SERIAL_GETESTAT, &st) < 0)
- return;
- printf ("%s\t", chan_name);
-
- /* Unavailable seconds, degraded minutes */
- print_frac (0, st.currnt.uas, st.cursec);
- print_frac (1, 60 * st.currnt.dm, st.cursec);
-
- /* Bipolar violations, frame sync errors */
- print_frac (0, st.currnt.bpv, st.cursec);
- print_frac (1, st.currnt.fse, st.cursec);
-
- /* CRC errors, remote CRC errors (E-bit) */
- print_frac (0, st.currnt.crce, st.cursec);
- print_frac (1, st.currnt.rcrce, st.cursec);
-
- /* Errored seconds, line errored seconds */
- print_frac (0, st.currnt.es, st.cursec);
- print_frac (1, st.currnt.les, st.cursec);
-
- /* Severely errored seconds, bursty errored seconds */
- print_frac (0, st.currnt.ses, st.cursec);
- print_frac (1, st.currnt.bes, st.cursec);
-
- /* Out of frame seconds, controlled slip seconds */
- print_frac (0, st.currnt.oofs, st.cursec);
- print_frac (1, st.currnt.css, st.cursec);
-
- printf (" %s\n", format_e1_status (st.status));
-
- if (fflag) {
- /* Print total statistics. */
- printf ("\t");
- print_frac (0, st.total.uas, st.totsec);
- print_frac (1, 60 * st.total.dm, st.totsec);
-
- print_frac (0, st.total.bpv, st.totsec);
- print_frac (1, st.total.fse, st.totsec);
-
- print_frac (0, st.total.crce, st.totsec);
- print_frac (1, st.total.rcrce, st.totsec);
-
- print_frac (0, st.total.es, st.totsec);
- print_frac (1, st.total.les, st.totsec);
-
- print_frac (0, st.total.ses, st.totsec);
- print_frac (1, st.total.bes, st.totsec);
-
- print_frac (0, st.total.oofs, st.totsec);
- print_frac (1, st.total.css, st.totsec);
-
- printf (" -- Total\n");
-
- /* Print 24-hour history. */
- maxi = (st.totsec - st.cursec) / 900;
- if (maxi > 48)
- maxi = 48;
- for (i=0; i<maxi; ++i) {
- printf (" ");
- print_frac (0, st.interval[i].uas, 15*60);
- print_frac (1, 60 * st.interval[i].dm, 15*60);
-
- print_frac (0, st.interval[i].bpv, 15*60);
- print_frac (1, st.interval[i].fse, 15*60);
-
- print_frac (0, st.interval[i].crce, 15*60);
- print_frac (1, st.interval[i].rcrce, 15*60);
-
- print_frac (0, st.interval[i].es, 15*60);
- print_frac (1, st.interval[i].les, 15*60);
-
- print_frac (0, st.interval[i].ses, 15*60);
- print_frac (1, st.interval[i].bes, 15*60);
-
- print_frac (0, st.interval[i].oofs, 15*60);
- print_frac (1, st.interval[i].css, 15*60);
-
- if (i < 3)
- printf (" -- %dm\n", (i+1)*15);
- else
- printf (" -- %dh %dm\n", (i+1)/4, (i+1)%4*15);
- }
- }
-}
-
-static char *
-format_e3_status (unsigned long status)
-{
- static char buf [80];
-
- buf[0] = 0;
- if (status & E3_LOS) strcat (buf, ",LOS");
- if (status & E3_TXE) strcat (buf, ",XMIT");
- if (buf[0] == ',')
- return buf+1;
- return "Ok";
-}
-
-static char *
-format_e3_cv (unsigned long cv, unsigned long baud, unsigned long atime)
-{
- static char buf[80];
-
- if (!cv || !baud || !atime)
- sprintf (buf, " - ");
- else
- sprintf (buf, "%10lu (%.1e)", cv, (double)cv/baud/atime);
- return buf;
-}
-
-static void
-print_e3_stats (int fd, int need_header)
-{
- struct e3_statistics st;
- int i, maxi;
- long baud;
-
- if (need_header)
- printf ("Chan\t--Code Violations---\t\t\t\t\t ----Status----\n");
-
- if (ioctl (fd, SERIAL_GETE3STAT, &st) < 0 ||
- ioctl (fd, SERIAL_GETBAUD, &baud) < 0)
- return;
-
- if (!st.cursec)
- st.cursec = 1;
-
- printf ("%s\t%s\t\t\t\t\t", chan_name,
- format_e3_cv (st.ccv, baud, st.cursec));
-
- printf (" %s\n", format_e3_status (st.status));
-
-
- if (uflag) {
- /* Print total statistics. */
- printf ("\t%s\t\t\t\t\t",
- format_e3_cv (st.tcv, baud, st.totsec));
- printf (" -- Total\n");
-
- /* Print 24-hour history. */
- maxi = (st.totsec - st.cursec) / 900;
- if (maxi > 48)
- maxi = 48;
- for (i=0; i<maxi; ++i) {
- printf ("\t%s\t\t\t\t\t",
- format_e3_cv (st.icv[i], baud, 15*60));
- if (i < 3)
- printf (" -- %2dm\n", (i+1)*15);
- else
- printf (" -- %2dh %2dm\n", (i+1)/4, (i+1)%4*15);
- }
- }
-}
-
-static void
-print_chan (int fd)
-{
- char protocol [8];
- char cfg;
- int loop, dpll, nrzi, invclk, clk, higain, phony, use16, crc4;
- int level, keepalive, debug, port, invrclk, invtclk, unfram, monitor;
- int cable, dir, scrambler, ami, mtu;
- int cablen, rloop, rqlen;
- long baud, timeslots, subchan;
- int protocol_valid, baud_valid, loop_valid, use16_valid, crc4_valid;
- int dpll_valid, nrzi_valid, invclk_valid, clk_valid, phony_valid;
- int timeslots_valid, subchan_valid, higain_valid, level_valid;
- int keepalive_valid, debug_valid, cfg_valid, port_valid;
- int invrclk_valid, invtclk_valid, unfram_valid, monitor_valid;
- int cable_valid, dir_valid, scrambler_valid, ami_valid, mtu_valid;
- int cablen_valid, rloop_valid, rqlen_valid;
-
- protocol_valid = ioctl (fd, SERIAL_GETPROTO, &protocol) >= 0;
- cfg_valid = ioctl (fd, SERIAL_GETCFG, &cfg) >= 0;
- baud_valid = ioctl (fd, SERIAL_GETBAUD, &baud) >= 0;
- loop_valid = ioctl (fd, SERIAL_GETLOOP, &loop) >= 0;
- dpll_valid = ioctl (fd, SERIAL_GETDPLL, &dpll) >= 0;
- nrzi_valid = ioctl (fd, SERIAL_GETNRZI, &nrzi) >= 0;
- invclk_valid = ioctl (fd, SERIAL_GETINVCLK, &invclk) >= 0;
- invrclk_valid = ioctl (fd, SERIAL_GETINVRCLK, &invrclk) >= 0;
- invtclk_valid = ioctl (fd, SERIAL_GETINVTCLK, &invtclk) >= 0;
- clk_valid = ioctl (fd, SERIAL_GETCLK, &clk) >= 0;
- timeslots_valid = ioctl (fd, SERIAL_GETTIMESLOTS, &timeslots) >= 0;
- subchan_valid = ioctl (fd, SERIAL_GETSUBCHAN, &subchan) >= 0;
- higain_valid = ioctl (fd, SERIAL_GETHIGAIN, &higain) >= 0;
- phony_valid = ioctl (fd, SERIAL_GETPHONY, &phony) >= 0;
- unfram_valid = ioctl (fd, SERIAL_GETUNFRAM, &unfram) >= 0;
- monitor_valid = ioctl (fd, SERIAL_GETMONITOR, &monitor) >= 0;
- use16_valid = ioctl (fd, SERIAL_GETUSE16, &use16) >= 0;
- crc4_valid = ioctl (fd, SERIAL_GETCRC4, &crc4) >= 0;
- ami_valid = ioctl (fd, SERIAL_GETLCODE, &ami) >= 0;
- level_valid = ioctl (fd, SERIAL_GETLEVEL, &level) >= 0;
- keepalive_valid = ioctl (fd, SERIAL_GETKEEPALIVE, &keepalive) >= 0;
- debug_valid = ioctl (fd, SERIAL_GETDEBUG, &debug) >= 0;
- port_valid = ioctl (fd, SERIAL_GETPORT, &port) >= 0;
- cable_valid = ioctl (fd, SERIAL_GETCABLE, &cable) >= 0;
- dir_valid = ioctl (fd, SERIAL_GETDIR, &dir) >= 0;
- scrambler_valid = ioctl (fd, SERIAL_GETSCRAMBLER, &scrambler) >= 0;
- cablen_valid = ioctl (fd, SERIAL_GETCABLEN, &cablen) >= 0;
- rloop_valid = ioctl (fd, SERIAL_GETRLOOP, &rloop) >= 0;
- mtu_valid = ioctl (fd, SERIAL_GETMTU, &mtu) >= 0;
- rqlen_valid = ioctl (fd, SERIAL_GETRQLEN, &rqlen) >= 0;
-
- printf ("%s", chan_name);
- if (port_valid)
- switch (port) {
- case 0: printf (" (rs232)"); break;
- case 1: printf (" (v35)"); break;
- case 2: printf (" (rs530)"); break;
- }
- else if (cable_valid)
- switch (cable) {
- case 0: printf (" (rs232)"); break;
- case 1: printf (" (v35)"); break;
- case 2: printf (" (rs530)"); break;
- case 3: printf (" (x21)"); break;
- case 4: printf (" (rs485)"); break;
- case 9: printf (" (no cable)"); break;
- }
- if (debug_valid && debug)
- printf (" debug=%d", debug);
- if (protocol_valid && *protocol)
- printf (" %.8s", protocol);
- else
- printf (" idle");
- if (cablen_valid)
- printf (" cablen=%s", cablen ? "on" : "off");
- if (keepalive_valid)
- printf (" keepalive=%s", keepalive ? "on" : "off");
-
- if (cfg_valid)
- switch (cfg) {
- case 'a' : printf (" cfg=A"); break;
- case 'b' : printf (" cfg=B"); break;
- case 'c' : printf (" cfg=C"); break;
- case 'd' : printf (" cfg=D"); break;
- default : printf (" cfg=unknown");
- }
- if (dir_valid)
- printf (" dir=%d", dir);
-
- if (baud_valid) {
- if (baud)
- printf (" %ld", baud);
- else
- printf (" extclock");
- }
- if (mtu_valid)
- printf (" mtu=%d", mtu);
-
- if (aflag && rqlen_valid)
- printf (" rqlen=%d", rqlen);
-
- if (clk_valid)
- switch (clk) {
- case E1CLK_INTERNAL: printf (" syn=int"); break;
- case E1CLK_RECEIVE: printf (" syn=rcv"); break;
- case E1CLK_RECEIVE_CHAN0: printf (" syn=rcv0"); break;
- case E1CLK_RECEIVE_CHAN1: printf (" syn=rcv1"); break;
- case E1CLK_RECEIVE_CHAN2: printf (" syn=rcv2"); break;
- case E1CLK_RECEIVE_CHAN3: printf (" syn=rcv3"); break;
- default: printf (" syn=%d", clk); break;
- }
-
- if (dpll_valid)
- printf (" dpll=%s", dpll ? "on" : "off");
- if (nrzi_valid)
- printf (" nrzi=%s", nrzi ? "on" : "off");
- if (invclk_valid)
- printf (" invclk=%s", invclk ? "on" : "off");
- if (invrclk_valid)
- printf (" invrclk=%s", invrclk ? "on" : "off");
- if (invtclk_valid)
- printf (" invtclk=%s", invtclk ? "on" : "off");
- if (unfram_valid)
- printf (" unfram=%s", unfram ? "on" : "off");
- if (use16_valid)
- printf (" use16=%s", use16 ? "on" : "off");
- if (aflag) {
- if (crc4_valid)
- printf (" crc4=%s", crc4 ? "on" : "off");
- if (higain_valid)
- printf (" higain=%s", higain ? "on" : "off");
- if (monitor_valid)
- printf (" monitor=%s", monitor ? "on" : "off");
- if (phony_valid)
- printf (" phony=%s", phony ? "on" : "off");
- if (scrambler_valid)
- printf (" scrambler=%s", scrambler ? "on" : "off");
- if (loop_valid)
- printf (" loop=%s", loop ? "on" : "off");
- if (rloop_valid)
- printf (" rloop=%s", rloop ? "on" : "off");
- if (ami_valid)
- printf (" ami=%s", ami ? "on" : "off");
- }
- if (timeslots_valid)
- printf (" ts=%s", format_timeslots (timeslots));
- if (subchan_valid)
- printf (" pass=%s", format_timeslots (subchan));
- if (level_valid)
- printf (" (level=-%.1fdB)", level / 10.0);
- printf ("\n");
-}
-
-static void
-setup_chan (int fd, int argc, char **argv)
-{
- int i, mode, loop, nrzi, dpll, invclk, phony, use16, crc4, unfram, ami;
- int higain, clk, keepalive, debug, port, dlci, invrclk, invtclk;
- int monitor, dir, scrambler, rloop, cablen;
- int mode_valid;
- long baud, timeslots, mtu, rqlen;
-
- for (i=0; i<argc; ++i) {
- if (argv[i][0] >= '0' && argv[i][0] <= '9') {
- baud = strtol (argv[i], 0, 10);
- ioctl (fd, SERIAL_SETBAUD, &baud);
- } else if (strcasecmp ("extclock", argv[i]) == 0) {
- baud = 0;
- ioctl (fd, SERIAL_SETBAUD, &baud);
- } else if (strncasecmp ("cfg=", argv[i], 4) == 0) {
- if (strncasecmp ("a", argv[i]+4, 1) == 0)
- ioctl (fd, SERIAL_SETCFG, "a");
- else if (strncasecmp ("b", argv[i]+4, 1) == 0)
- ioctl (fd, SERIAL_SETCFG, "b");
- else if (strncasecmp ("c", argv[i]+4, 1) == 0)
- ioctl (fd, SERIAL_SETCFG, "c");
- else if (strncasecmp ("d", argv[i]+4, 1) == 0)
- ioctl (fd, SERIAL_SETCFG, "d");
- else {
- fprintf (stderr, "invalid cfg\n");
- exit (-1);
- }
- } else if (strcasecmp ("idle", argv[i]) == 0)
- ioctl (fd, SERIAL_SETPROTO, "\0\0\0\0\0\0\0");
- else if (strcasecmp ("async", argv[i]) == 0) {
- mode = SERIAL_ASYNC;
- if (ioctl (fd, SERIAL_SETMODE, &mode) >= 0)
- ioctl (fd, SERIAL_SETPROTO, "async\0\0");
- } else if (strcasecmp ("sync", argv[i]) == 0) {
- mode = SERIAL_HDLC;
- if (ioctl (fd, SERIAL_SETMODE, &mode) >= 0)
- ioctl (fd, SERIAL_SETPROTO, "sync\0\0\0");
- } else if (strcasecmp ("cisco", argv[i]) == 0) {
- mode = SERIAL_HDLC;
- ioctl (fd, SERIAL_SETMODE, &mode);
- ioctl (fd, SERIAL_SETPROTO, "cisco\0\0");
- } else if (strcasecmp ("rbrg", argv[i]) == 0) {
- mode = SERIAL_HDLC;
- ioctl (fd, SERIAL_SETMODE, &mode);
- ioctl (fd, SERIAL_SETPROTO, "rbrg\0\0\0");
- } else if (strcasecmp ("raw", argv[i]) == 0) {
- mode = SERIAL_HDLC;
- ioctl (fd, SERIAL_SETMODE, &mode);
- ioctl (fd, SERIAL_SETPROTO, "raw\0\0\0\0");
- } else if (strcasecmp ("packet", argv[i]) == 0) {
- mode = SERIAL_HDLC;
- ioctl (fd, SERIAL_SETMODE, &mode);
- ioctl (fd, SERIAL_SETPROTO, "packet\0");
- } else if (strcasecmp ("ppp", argv[i]) == 0) {
- /* check that ppp line discipline is present */
- if (ppp_ok ()) {
- mode = SERIAL_HDLC;
- ioctl (fd, SERIAL_SETMODE, &mode);
- ioctl (fd, SERIAL_SETPROTO, "ppp\0\0\0\0");
- }
- } else if (strncasecmp ("keepalive=", argv[i], 10) == 0) {
- keepalive = (strcasecmp ("on", argv[i] + 10) == 0);
- ioctl (fd, SERIAL_SETKEEPALIVE, &keepalive);
- } else if (strcasecmp ("fr", argv[i]) == 0) {
- mode = SERIAL_HDLC;
- ioctl (fd, SERIAL_SETMODE, &mode);
- ioctl (fd, SERIAL_SETPROTO, "fr\0\0\0\0\0");
- } else if (strcasecmp ("zaptel", argv[i]) == 0) {
- mode = SERIAL_HDLC;
- ioctl (fd, SERIAL_SETMODE, &mode);
- ioctl (fd, SERIAL_SETPROTO, "zaptel\0");
- } else if (strncasecmp ("debug=", argv[i], 6) == 0) {
- debug = strtol (argv[i]+6, 0, 10);
- mode_valid = ioctl (fd, SERIAL_GETMODE, &mode) >= 0;
- if (!mode_valid || mode != SERIAL_ASYNC) {
- if (debug == 0) {
- set_debug_ifconfig(0);
- } else {
- ioctl (fd, SERIAL_SETDEBUG, &debug);
- set_debug_ifconfig(1);
- }
- } else {
- ioctl (fd, SERIAL_SETDEBUG, &debug);
- }
- } else if (strncasecmp ("loop=", argv[i], 5) == 0) {
- loop = (strcasecmp ("on", argv[i] + 5) == 0);
- ioctl (fd, SERIAL_SETLOOP, &loop);
- } else if (strncasecmp ("rloop=", argv[i], 6) == 0) {
- rloop = (strcasecmp ("on", argv[i] + 6) == 0);
- ioctl (fd, SERIAL_SETRLOOP, &rloop);
- } else if (strncasecmp ("dpll=", argv[i], 5) == 0) {
- dpll = (strcasecmp ("on", argv[i] + 5) == 0);
- ioctl (fd, SERIAL_SETDPLL, &dpll);
- } else if (strncasecmp ("nrzi=", argv[i], 5) == 0) {
- nrzi = (strcasecmp ("on", argv[i] + 5) == 0);
- ioctl (fd, SERIAL_SETNRZI, &nrzi);
- } else if (strncasecmp ("invclk=", argv[i], 7) == 0) {
- invclk = (strcasecmp ("on", argv[i] + 7) == 0);
- ioctl (fd, SERIAL_SETINVCLK, &invclk);
- } else if (strncasecmp ("invrclk=", argv[i], 8) == 0) {
- invrclk = (strcasecmp ("on", argv[i] + 8) == 0);
- ioctl (fd, SERIAL_SETINVRCLK, &invrclk);
- } else if (strncasecmp ("invtclk=", argv[i], 8) == 0) {
- invtclk = (strcasecmp ("on", argv[i] + 8) == 0);
- ioctl (fd, SERIAL_SETINVTCLK, &invtclk);
- } else if (strncasecmp ("higain=", argv[i], 7) == 0) {
- higain = (strcasecmp ("on", argv[i] + 7) == 0);
- ioctl (fd, SERIAL_SETHIGAIN, &higain);
- } else if (strncasecmp ("phony=", argv[i], 6) == 0) {
- phony = (strcasecmp ("on", argv[i] + 6) == 0);
- ioctl (fd, SERIAL_SETPHONY, &phony);
- } else if (strncasecmp ("unfram=", argv[i], 7) == 0) {
- unfram = (strcasecmp ("on", argv[i] + 7) == 0);
- ioctl (fd, SERIAL_SETUNFRAM, &unfram);
- } else if (strncasecmp ("scrambler=", argv[i], 10) == 0) {
- scrambler = (strcasecmp ("on", argv[i] + 10) == 0);
- ioctl (fd, SERIAL_SETSCRAMBLER, &scrambler);
- } else if (strncasecmp ("monitor=", argv[i], 8) == 0) {
- monitor = (strcasecmp ("on", argv[i] + 8) == 0);
- ioctl (fd, SERIAL_SETMONITOR, &monitor);
- } else if (strncasecmp ("use16=", argv[i], 6) == 0) {
- use16 = (strcasecmp ("on", argv[i] + 6) == 0);
- ioctl (fd, SERIAL_SETUSE16, &use16);
- } else if (strncasecmp ("crc4=", argv[i], 5) == 0) {
- crc4 = (strcasecmp ("on", argv[i] + 5) == 0);
- ioctl (fd, SERIAL_SETCRC4, &crc4);
- } else if (strncasecmp ("ami=", argv[i], 4) == 0) {
- ami = (strcasecmp ("on", argv[i] + 4) == 0);
- ioctl (fd, SERIAL_SETLCODE, &ami);
- } else if (strncasecmp ("mtu=", argv[i], 4) == 0) {
- mtu = strtol (argv[i] + 4, 0, 10);
- ioctl (fd, SERIAL_SETMTU, &mtu);
- } else if (strncasecmp ("rqlen=", argv[i], 6) == 0) {
- rqlen = strtol (argv[i] + 6, 0, 10);
- ioctl (fd, SERIAL_SETRQLEN, &rqlen);
- } else if (strcasecmp ("syn=int", argv[i]) == 0) {
- clk = E1CLK_INTERNAL;
- ioctl (fd, SERIAL_SETCLK, &clk);
- } else if (strcasecmp ("syn=rcv", argv[i]) == 0) {
- clk = E1CLK_RECEIVE;
- ioctl (fd, SERIAL_SETCLK, &clk);
- } else if (strcasecmp ("syn=rcv0", argv[i]) == 0) {
- clk = E1CLK_RECEIVE_CHAN0;
- ioctl (fd, SERIAL_SETCLK, &clk);
- } else if (strcasecmp ("syn=rcv1", argv[i]) == 0) {
- clk = E1CLK_RECEIVE_CHAN1;
- ioctl (fd, SERIAL_SETCLK, &clk);
- } else if (strcasecmp ("syn=rcv2", argv[i]) == 0) {
- clk = E1CLK_RECEIVE_CHAN2;
- ioctl (fd, SERIAL_SETCLK, &clk);
- } else if (strcasecmp ("syn=rcv3", argv[i]) == 0) {
- clk = E1CLK_RECEIVE_CHAN3;
- ioctl (fd, SERIAL_SETCLK, &clk);
- } else if (strncasecmp ("ts=", argv[i], 3) == 0) {
- timeslots = scan_timeslots (argv[i] + 3);
- ioctl (fd, SERIAL_SETTIMESLOTS, &timeslots);
- } else if (strncasecmp ("pass=", argv[i], 5) == 0) {
- timeslots = scan_timeslots (argv[i] + 5);
- ioctl (fd, SERIAL_SETSUBCHAN, &timeslots);
- } else if (strncasecmp ("dlci", argv[i], 4) == 0) {
- dlci = strtol (argv[i]+4, 0, 10);
- ioctl (fd, SERIAL_ADDDLCI, &dlci);
- } else if (strncasecmp ("dir=", argv[i], 4) == 0) {
- dir = strtol (argv[i]+4, 0, 10);
- ioctl (fd, SERIAL_SETDIR, &dir);
- } else if (strncasecmp ("port=", argv[i], 5) == 0) {
- if (strncasecmp ("rs232", argv[i]+5, 5) == 0) {
- port = 0;
- ioctl (fd, SERIAL_SETPORT, &port);
- } else if (strncasecmp ("v35", argv[i]+5, 3) == 0) {
- port = 1;
- ioctl (fd, SERIAL_SETPORT, &port);
- } else if (strncasecmp ("rs449", argv[i]+5, 5) == 0) {
- port = 2;
- ioctl (fd, SERIAL_SETPORT, &port);
- } else {
- fprintf (stderr, "invalid port type\n");
- exit (-1);
- }
-#if 1
- } else if (strcasecmp ("reset", argv[i]) == 0) {
- ioctl (fd, SERIAL_RESET, 0);
- } else if (strcasecmp ("hwreset", argv[i]) == 0) {
- ioctl (fd, SERIAL_HARDRESET, 0);
-#endif
- } else if (strncasecmp ("cablen=", argv[i], 7) == 0) {
- loop = (strcasecmp ("on", argv[i] + 7) == 0);
- ioctl (fd, SERIAL_SETCABLEN, &cablen);
- }
- }
-}
-
-static void
-get_mask (void)
-{
-#ifdef __linux__
- int fd;
-
- fd = open ("/dev/serial/ctl0", 0);
- if (fd < 0) {
- perror ("/dev/serial/ctl0");
- exit (-1);
- }
- if (ioctl (fd, SERIAL_GETREGISTERED, &mask) < 0) {
- perror ("getting list of channels");
- exit (-1);
- }
- close (fd);
-#else
- int fd, fd1, fd2, fd3, i;
- char buf [80];
-
- for (i=0, fd=-1; i<12 && fd<0; i++) {
- sprintf (buf, "/dev/cx%d", i*4);
- fd = open (buf, 0);
- }
-
- for (i=0, fd1=-1; i<3 && fd1<0; i++) {
- sprintf (buf, "/dev/ct%d", i*2);
- fd1 = open (buf, 0);
- }
-
- for (i=0, fd2=-1; i<3 && fd2<0; i++) {
- sprintf (buf, "/dev/cp%d", i*4);
- fd2 = open (buf, 0);
- }
-
- /* Try only one */
- for (i=0, fd3=-1; i<1 && fd3<0; i++) {
- sprintf (buf, "/dev/ce%d", i*4);
- fd3 = open (buf, 0);
- }
-
- if ((fd < 0) && (fd1 < 0) && (fd2 < 0) && (fd3 < 0)) {
- fprintf (stderr, "No Cronyx adapters installed\n");
- exit (-1);
- }
-
- if (fd >= 0) {
- if (ioctl (fd, SERIAL_GETREGISTERED, &mask) < 0) {
- perror ("getting list of channels");
- exit (-1);
- }
- close (fd);
- }
-
- if (fd1 >= 0) {
- if (ioctl (fd1, SERIAL_GETREGISTERED, (mask+16)) < 0) {
- perror ("getting list of channels");
- exit (-1);
- }
- close (fd1);
- }
-
- if (fd2 >= 0) {
- if (ioctl (fd2, SERIAL_GETREGISTERED, (mask+32)) < 0) {
- perror ("getting list of channels");
- exit (-1);
- }
- close (fd2);
- }
-
- if (fd3 >= 0) {
- if (ioctl (fd3, SERIAL_GETREGISTERED, (mask+48)) < 0) {
- perror ("getting list of channels");
- exit (-1);
- }
- close (fd3);
- }
-#endif
-}
-
-static int
-open_chan_ctl (int num)
-{
- char device [80];
- int fd;
-
-#ifdef __linux__
- sprintf (device, "/dev/serial/ctl%d", num);
-#else
- switch (adapter_type) {
- case 0:
- sprintf (device, "/dev/cx%d", num);
- break;
- case 1:
- sprintf (device, "/dev/ct%d", num);
- break;
- case 2:
- sprintf (device, "/dev/cp%d", num);
- break;
- case 3:
- sprintf (device, "/dev/ce%d", num);
- break;
- }
-#endif
- fd = open (device, 0);
- if (fd < 0) {
- if (errno == ENODEV)
- fprintf (stderr, "chan%d: not configured\n", num);
- else
- perror (device);
- exit (-1);
- }
-#ifdef __linux__
- if (ioctl (fd, SERIAL_GETNAME, &chan_name) < 0)
- sprintf (chan_name, "chan%d", num);
-#else
- switch (adapter_type) {
- case 0: sprintf (chan_name, "cx%d", num); break;
- case 1: sprintf (chan_name, "ct%d", num); break;
- case 2: sprintf (chan_name, "cp%d", num); break;
- case 3: sprintf (chan_name, "ce%d", num); break;
- }
-#endif
- return fd;
-}
-
-int
-main (int argc, char **argv)
-{
- char *p;
- int fd, need_header, chan_num;
-
- if (argc > 1 && strcmp(argv[1], "help") == 0)
- usage();
-
- for (;;) {
- switch (getopt (argc, argv, "mseftucviax")) {
- case -1:
- break;
- case 'a':
- ++aflag;
- continue;
- case 'm':
- ++mflag;
- continue;
- case 's':
- ++sflag;
- continue;
- case 'e':
- ++eflag;
- continue;
- case 'f':
- ++eflag;
- ++fflag;
- continue;
- case 't':
- ++tflag;
- continue;
- case 'u':
- ++tflag;
- ++uflag;
- continue;
- case 'c':
- ++cflag;
- continue;
- case 'v':
- ++vflag;
- continue;
- case 'i':
- ++iflag;
- continue;
- case 'x':
- ++xflag;
- continue;
- default:
- usage();
- }
- break;
- }
- argc -= optind;
- argv += optind;
-
- if (argc <= 0) {
- get_mask ();
- need_header = 1;
- adapter_type = 0;
-#ifndef __linux__
- for (; adapter_type < 4; ++adapter_type)
-#endif
- {
- for (chan_num=0; chan_num<MAXCHAN; ++chan_num)
- if (mask[adapter_type*16+chan_num/8] & 1 << (chan_num & 7)) {
- fd = open_chan_ctl (chan_num);
- if (vflag) {
-#ifdef __linux__
- char buf[256];
- if (ioctl (fd, SERIAL_GETVERSIONSTRING, &buf) >= 0) {
- printf ("Version: %s\n", buf);
- close (fd);
- return (0);
- }
-#endif
- }
- if (iflag) {
- print_chan (fd);
- print_ifconfig (fd);
- } else if (sflag||xflag)
- print_stats (fd, need_header);
- else if (mflag)
- print_modems (fd, need_header);
- else if (eflag)
- print_e1_stats (fd, need_header);
- else if (tflag)
- print_e3_stats (fd, need_header);
- else if (cflag)
- clear_stats (fd);
- else
- print_chan (fd);
- close (fd);
- need_header = 0;
- }
- }
- return (0);
- }
-
- p = argv[0] + strlen (argv[0]);
- while (p > argv[0] && p[-1] >= '0' && p[-1] <= '9')
- --p;
- chan_num = strtol (p, 0, 10);
-#ifndef __linux__
- if (strncasecmp ("cx", argv[0], 2)==0)
- adapter_type = 0;
- else if (strncasecmp ("ct", argv[0], 2)==0)
- adapter_type = 1;
- else if (strncasecmp ("cp", argv[0], 2)==0)
- adapter_type = 2;
- else if (strncasecmp ("ce", argv[0], 2)==0)
- adapter_type = 3;
- else {
- fprintf (stderr, "Wrong channel name\n");
- exit (-1);
- }
-#endif
- argc--;
- argv++;
-
- fd = open_chan_ctl (chan_num);
- if (vflag) {
-#ifdef __linux__
- char buf[256];
- if (ioctl (fd, SERIAL_GETVERSIONSTRING, &buf) >= 0)
- printf ("Version: %s\n", buf);
-#endif
- }
- if (iflag) {
- print_chan (fd);
- print_ifconfig (fd);
- close (fd);
- return (0);
- }
- if (sflag||xflag) {
- print_stats (fd, 1);
- close (fd);
- return (0);
- }
- if (mflag) {
- print_modems (fd, 1);
- close (fd);
- return (0);
- }
- if (eflag) {
- print_e1_stats (fd, 1);
- close (fd);
- return (0);
- }
- if (tflag) {
- print_e3_stats (fd, 1);
- close (fd);
- return (0);
- }
- if (cflag) {
- clear_stats (fd);
- close (fd);
- return (0);
- }
- if (argc > 0)
- setup_chan (fd, argc, argv);
- else
- print_chan (fd);
- close (fd);
- return (0);
-}

File Metadata

Mime Type
text/plain
Expires
Wed, Feb 5, 3:45 PM (20 h, 56 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
16476589
Default Alt Text
D33469.diff (53 KB)

Event Timeline