Page MenuHomeFreeBSD
Files F109366882

D40718.diff
No OneTemporary
Actions

D40718.diff
View Options

diff --git a/sys/cam/scsi/scsi_all.c b/sys/cam/scsi/scsi_all.c
--- a/sys/cam/scsi/scsi_all.c
+++ b/sys/cam/scsi/scsi_all.c
@@ -977,7 +977,7 @@
*
* SCSI ASC/ASCQ Assignments
* Numeric Sorted Listing
- * as of 8/12/15
+ * as of Sat Mar 25 2023 at 04:30 (using old columns)
*
* D - DIRECT ACCESS DEVICE (SBC-2) device column key
* .T - SEQUENTIAL ACCESS DEVICE (SSC) -------------------
@@ -1072,6 +1072,12 @@
/* D */
{ SST(0x00, 0x21, SS_RDEF, /* XXX TBD */
"Atomic command aborted due to ACA") },
+ /* D */
+ { SST(0x00, 0x22, SS_RDEF, /* XXX TBD */
+ "Deferred microcode is pending") },
+ /* D */
+ { SST(0x00, 0x23, SS_RDEF, /* XXX TBD */
+ "Overlapping atomic command in progress") },
/* D W O BK */
{ SST(0x01, 0x00, SS_RDEF,
"No index/sector signal") },
@@ -1273,30 +1279,39 @@
/* D */
{ SST(0x0B, 0x09, SS_NOP | SSQ_PRINT_SENSE,
"Warning - device statistics notification available") },
- /* DTLPWROMAEBKVF */
+ /* DTLPWROMAEBKV */
{ SST(0x0B, 0x0A, SS_NOP | SSQ_PRINT_SENSE,
"Warning - High critical temperature limit exceeded") },
- /* DTLPWROMAEBKVF */
+ /* DTLPWROMAEBKV */
{ SST(0x0B, 0x0B, SS_NOP | SSQ_PRINT_SENSE,
"Warning - Low critical temperature limit exceeded") },
- /* DTLPWROMAEBKVF */
+ /* DTLPWROMAEBKV */
{ SST(0x0B, 0x0C, SS_NOP | SSQ_PRINT_SENSE,
"Warning - High operating temperature limit exceeded") },
- /* DTLPWROMAEBKVF */
+ /* DTLPWROMAEBKV */
{ SST(0x0B, 0x0D, SS_NOP | SSQ_PRINT_SENSE,
"Warning - Low operating temperature limit exceeded") },
- /* DTLPWROMAEBKVF */
+ /* DTLPWROMAEBKV */
{ SST(0x0B, 0x0E, SS_NOP | SSQ_PRINT_SENSE,
"Warning - High citical humidity limit exceeded") },
- /* DTLPWROMAEBKVF */
+ /* DTLPWROMAEBKV */
{ SST(0x0B, 0x0F, SS_NOP | SSQ_PRINT_SENSE,
"Warning - Low citical humidity limit exceeded") },
- /* DTLPWROMAEBKVF */
+ /* DTLPWROMAEBKV */
{ SST(0x0B, 0x10, SS_NOP | SSQ_PRINT_SENSE,
"Warning - High operating humidity limit exceeded") },
- /* DTLPWROMAEBKVF */
+ /* DTLPWROMAEBKV */
{ SST(0x0B, 0x11, SS_NOP | SSQ_PRINT_SENSE,
"Warning - Low operating humidity limit exceeded") },
+ /* DTLPWROMAEBKVF */
+ { SST(0x0B, 0x12, SS_NOP | SSQ_PRINT_SENSE,
+ "Warning - Microcode security at risk") },
+ /* DTLPWROMAEBKVF */
+ { SST(0x0B, 0x13, SS_NOP | SSQ_PRINT_SENSE,
+ "Warning - Microcode digital signature validation failure") },
+ /* D */
+ { SST(0x0B, 0x14, SS_NOP | SSQ_PRINT_SENSE,
+ "Warning - Physical element status change") },
/* T R */
{ SST(0x0C, 0x00, SS_RDEF,
"Write error") },
@@ -1657,6 +1672,15 @@
/* T */
{ SST(0x20, 0x0C, SS_FATAL | EINVAL,
"Illegal command when not in append-only mode") },
+ /* D */
+ { SST(0x20, 0x0D, SS_FATAL | EINVAL,
+ "Not an administrative logical unit") },
+ /* D */
+ { SST(0x20, 0x0E, SS_FATAL | EINVAL,
+ "Not a subsidiary logical unit") },
+ /* D */
+ { SST(0x20, 0x0F, SS_FATAL | EINVAL,
+ "Not a conglomerate logical unit") },
/* DT WRO BK */
{ SST(0x21, 0x00, SS_FATAL | EINVAL,
"Logical block address out of range") },
@@ -1682,6 +1706,12 @@
{ SST(0x21, 0x07, SS_RDEF, /* XXX TBD */
"Read boundary violation") },
/* D */
+ { SST(0x21, 0x08, SS_FATAL | EINVAL,
+ "Misaligned write command") },
+ /* D */
+ { SST(0x21, 0x09, SS_FATAL | EINVAL,
+ "Attempt to access gap zone") },
+ /* D */
{ SST(0x22, 0x00, SS_FATAL | EINVAL,
"Illegal function (use 20 00, 24 00, or 26 00)") },
/* DT P B */
@@ -1744,6 +1774,9 @@
/* DT R MAEBKV */
{ SST(0x24, 0x08, SS_RDEF, /* XXX TBD */
"Invalid XCDB") },
+ /* D */
+ { SST(0x24, 0x09, SS_FATAL | EINVAL,
+ "Invalid fast format") },
/* DTLPWROMAEBKVF */
{ SST(0x25, 0x00, SS_FATAL | ENXIO | SSQ_LOST,
"Logical unit not supported") },
@@ -1807,6 +1840,15 @@
/* D */
{ SST(0x26, 0x13, SS_RDEF, /* XXX TBD */
"Application tag mode page is invalid") },
+ /* T */
+ { SST(0x26, 0x14, SS_RDEF, /* XXX TBD */
+ "Tape stream mirroring prevented") },
+ /* T */
+ { SST(0x26, 0x15, SS_FATAL | EINVAL,
+ "Copy source or copy destination not authorized") },
+ /* D */
+ { SST(0x26, 0x16, SS_FATAL | EINVAL,
+ "Fast copy not possible") },
/* DT WRO BK */
{ SST(0x27, 0x00, SS_FATAL | EACCES,
"Write protected") },
@@ -1935,6 +1977,9 @@
/* T M V */
{ SST(0x2A, 0x15, SS_RDEF, /* XXX TBD */
"Medium removal prevention preempted") },
+ /* D */
+ { SST(0x2A, 0x16, SS_RDEF, /* XXX TBD */
+ "Zone reset write pointer recommended") },
/* DTLPWRO K */
{ SST(0x2B, 0x00, SS_RDEF,
"Copy cannot execute since host cannot disconnect") },
@@ -1989,6 +2034,15 @@
/* D */
{ SST(0x2C, 0x10, SS_RDEF, /* XXX TBD */
"Unwritten data in zone") },
+ /* D */
+ { SST(0x2C, 0x11, SS_FATAL | EINVAL,
+ "Descriptor format sense data required") },
+ /* D */
+ { SST(0x2C, 0x12, SS_FATAL | EINVAL,
+ "Zone is inactive") },
+ /* DTPEROMAEBKVF */
+ { SST(0x2C, 0x13, SS_FATAL | EINVAL,
+ "Well known logical unit access required") },
/* T */
{ SST(0x2D, 0x00, SS_RDEF,
"Overwrite error on update in place") },
@@ -2136,6 +2190,9 @@
/* D */
{ SST(0x38, 0x07, SS_RDEF, /* XXX TBD */
"Thin provisioning soft threshold reached") },
+ /* D */
+ { SST(0x38, 0x08, SS_NOP | SSQ_PRINT_SENSE,
+ "Depopulation interrupted") },
/* DTL WROMAE K */
{ SST(0x39, 0x00, SS_RDEF,
"Saving parameters not supported") },
@@ -2238,6 +2295,9 @@
/* T */
{ SST(0x3B, 0x1C, SS_RDEF, /* XXX TBD */
"Too many logical objects on partition to support operation") },
+ /* M */
+ { SST(0x3B, 0x20, SS_RDEF, /* XXX TBD */
+ "Element static information changed") },
/* DTLPWROMAE K */
{ SST(0x3D, 0x00, SS_RDEF,
"Invalid bits in IDENTIFY message") },
@@ -2329,6 +2389,14 @@
{ SST(0x3F, 0x17, SS_RDEF, /* XXX TBD */
"Zone transition to full") },
/* D */
+ { SST(0x3F, 0x18, SS_RDEF, /* XXX TBD */
+ "Bind completed") },
+ /* D */
+ { SST(0x3F, 0x19, SS_RDEF, /* XXX TBD */
+ "Bind redirected") },
+ /* D */
+ { SST(0x3F, 0x1A, SS_RDEF, /* XXX TBD */
+ "Subsidiary binding changed") },
{ SST(0x40, 0x00, SS_RDEF,
"RAM failure") }, /* deprecated - use 40 NN instead */
/* DTLPWROMAEBKVF */
@@ -2587,6 +2655,9 @@
/* D */
{ SST(0x55, 0x10, SS_RDEF, /* XXX TBD */
"Maximum number of streams open") },
+ /* D */
+ { SST(0x55, 0x11, SS_RDEF, /* XXX TBD */
+ "Insufficient resources to bind") },
/* R */
{ SST(0x57, 0x00, SS_RDEF,
"Unable to recover table-of-contents") },
@@ -3010,6 +3081,12 @@
/* DT B */
{ SST(0x67, 0x0B, SS_RDEF, /* XXX TBD */
"ATA device feature not enabled") },
+ /* D */
+ { SST(0x67, 0x0C, SS_FATAL | EIO,
+ "Command rejected") },
+ /* D */
+ { SST(0x67, 0x0D, SS_FATAL | EINVAL,
+ "Explicit bind not allowed") },
/* A */
{ SST(0x68, 0x00, SS_RDEF,
"Logical unit not configured") },
@@ -3070,6 +3147,15 @@
/* R */
{ SST(0x6F, 0x07, SS_RDEF, /* XXX TBD */
"Conflict in binding NONCE recording") },
+ /* R */
+ { SST(0x6F, 0x08, SS_FATAL | EPERM,
+ "Insufficient permission") },
+ /* R */
+ { SST(0x6F, 0x09, SS_FATAL | EINVAL,
+ "Invalid drive-host pairing server") },
+ /* R */
+ { SST(0x6F, 0x0A, SS_RDEF, /* XXX TBD */
+ "Drive-host pairing suspended") },
/* T */
{ SST(0x70, 0x00, SS_RDEF,
"Decompression exception short: ASCQ = Algorithm ID") },

File Metadata

Mime Type
text/plain
Expires
Wed, Feb 5, 3:29 AM (20 h, 39 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
16466204
Default Alt Text
D40718.diff (7 KB)

Event Timeline