Page MenuHomeFreeBSD
Files F107194830

D34425.id.diff
No OneTemporary
Actions

D34425.id.diff
View Options

diff --git a/sys/dev/ocs_fc/ocs_hw.h b/sys/dev/ocs_fc/ocs_hw.h
--- a/sys/dev/ocs_fc/ocs_hw.h
+++ b/sys/dev/ocs_fc/ocs_hw.h
@@ -1374,6 +1374,8 @@
extern uint32_t ocs_hw_xri_move_to_port_owned(ocs_hw_t *hw, uint32_t num_xri);
extern ocs_hw_rtn_e ocs_hw_xri_move_to_host_owned(ocs_hw_t *hw, uint8_t num_xri);
extern int32_t ocs_hw_reque_xri(ocs_hw_t *hw, ocs_hw_io_t *io);
+ocs_hw_rtn_e ocs_hw_set_persistent_topology(ocs_hw_t *hw, uint32_t topology, uint32_t opts);
+extern uint32_t ocs_hw_get_config_persistent_topology(ocs_hw_t *hw);
typedef struct {
/* structure elements used by HW */
diff --git a/sys/dev/ocs_fc/ocs_hw.c b/sys/dev/ocs_fc/ocs_hw.c
--- a/sys/dev/ocs_fc/ocs_hw.c
+++ b/sys/dev/ocs_fc/ocs_hw.c
@@ -12071,6 +12071,168 @@
return 0;
}
+uint32_t
+ocs_hw_get_config_persistent_topology(ocs_hw_t *hw)
+{
+ uint32_t topology = OCS_HW_TOPOLOGY_AUTO;
+ sli4_t *sli = &hw->sli;
+
+ if (!sli_persist_topology_enabled(sli))
+ return topology;
+
+ switch (sli->config.pt) {
+ case SLI4_INIT_LINK_F_P2P_ONLY:
+ topology = OCS_HW_TOPOLOGY_NPORT;
+ break;
+ case SLI4_INIT_LINK_F_FCAL_ONLY:
+ topology = OCS_HW_TOPOLOGY_LOOP;
+ break;
+ default:
+ break;
+ }
+
+ return topology;
+}
+
+/*
+ * @brief Persistent topology configuration callback argument.
+ */
+typedef struct ocs_hw_persistent_topo_cb_arg {
+ ocs_sem_t semaphore;
+ int32_t status;
+} ocs_hw_persistent_topo_cb_arg_t;
+
+/*
+ * @brief Called after the completion of set persistent topology request
+ *
+ * @par Description
+ * This is callback fn for the set_persistent_topology
+ * function. This callback is called when the common feature mbx cmd
+ * completes.
+ *
+ * @param hw Hardware context.
+ * @param status The status from the MQE.
+ * @param mqe Pointer to mailbox command buffer.
+ * @param arg Pointer to a callback argument.
+ *
+ * @return 0 on success, non-zero otherwise
+ */
+static int32_t
+ocs_hw_set_persistent_topolgy_cb(ocs_hw_t *hw, int32_t status, uint8_t *mqe, void *arg)
+{
+ ocs_hw_persistent_topo_cb_arg_t *req = (ocs_hw_persistent_topo_cb_arg_t *)arg;
+
+ req->status = status;
+
+ ocs_sem_v(&req->semaphore);
+
+ return 0;
+}
+
+/**
+ * @brief Set persistent topology
+ *
+ * Sets the persistent topology(PT) feature using
+ * COMMON_SET_FEATURES cmd. If mbx cmd succeeds, update the
+ * topology into sli config. PT stores the value to be set into link_flags
+ * of the cmd INIT_LINK, to bring up the link.
+ *
+ * SLI specs defines following for PT:
+ * When TF is set to 0:
+ * 0 Reserved
+ * 1 Attempt point-to-point initialization (direct attach or Fabric topology).
+ * 2 Attempt FC-AL loop initialization.
+ * 3 Reserved
+ *
+ * When TF is set to 1:
+ * 0 Attempt FC-AL loop initialization; if it fails, attempt point-to-point initialization.
+ * 1 Attempt point-to-point initialization; if it fails, attempt FC-AL loop initialization.
+ * 2 Reserved
+ * 3 Reserved
+ *
+ * Note: Topology failover is only available on Lancer G5. This command will fail
+ * if TF is set to 1 on any other ASICs
+ *
+ * @param hw Pointer to hw
+ * @param topology topology value to be set, provided through
+ * elxsdkutil set-topology cmd
+ *
+ * @return Returns 0 on success, or a non-zero value on failure.
+ */
+ocs_hw_rtn_e
+ocs_hw_set_persistent_topology(ocs_hw_t *hw, uint32_t topology, uint32_t opts)
+{
+ ocs_hw_rtn_e rc = OCS_HW_RTN_SUCCESS;
+ uint8_t buf[SLI4_BMBX_SIZE];
+ sli4_req_common_set_features_persistent_topo_param_t param;
+ ocs_hw_persistent_topo_cb_arg_t request;
+
+ ocs_memset(&param, 0, sizeof(param));
+ param.persistent_topo = topology;
+
+ switch (topology) {
+ case OCS_HW_TOPOLOGY_AUTO:
+ if (sli_get_asic_type(&hw->sli) == SLI4_ASIC_TYPE_LANCER) {
+ param.persistent_topo = SLI4_INIT_LINK_F_P2P_FAIL_OVER;
+ param.topo_failover = 1;
+ } else {
+ param.persistent_topo = SLI4_INIT_LINK_F_P2P_ONLY;;
+ param.topo_failover = 0;
+ }
+ break;
+
+ case OCS_HW_TOPOLOGY_NPORT:
+ param.persistent_topo = SLI4_INIT_LINK_F_P2P_ONLY;
+ param.topo_failover = 0;
+ break;
+
+ case OCS_HW_TOPOLOGY_LOOP:
+ param.persistent_topo = SLI4_INIT_LINK_F_FCAL_ONLY;
+ param.topo_failover = 0;
+ break;
+
+ default:
+ ocs_log_err(hw->os, "unsupported topology %#x\n", topology);
+ return -1;
+ }
+
+ ocs_sem_init(&request.semaphore, 0, "set_persistent_topo");
+
+ /* build the set_features command */
+ sli_cmd_common_set_features(&hw->sli, buf, SLI4_BMBX_SIZE,
+ SLI4_SET_FEATURES_PERSISTENT_TOPOLOGY, sizeof(param), &param);
+
+ if (opts == OCS_CMD_POLL) {
+ rc = ocs_hw_command(hw, buf, OCS_CMD_POLL, NULL, NULL);
+ if (rc) {
+ ocs_log_err(hw->os, "Failed to set persistent topology, rc: %#x\n", rc);
+ return rc;
+ }
+ } else {
+
+ // there's no response for this feature command
+ rc = ocs_hw_command(hw, buf, OCS_CMD_NOWAIT, ocs_hw_set_persistent_topolgy_cb, &request);
+ if (rc) {
+ ocs_log_err(hw->os, "Failed to set persistent topology, rc: %#x\n", rc);
+ return rc;
+ }
+
+ if (ocs_sem_p(&request.semaphore, OCS_SEM_FOREVER)) {
+ ocs_log_err(hw->os, "ocs_sem_p failed\n");
+ return -ENXIO;
+ }
+
+ if (request.status) {
+ ocs_log_err(hw->os, "set persistent topology failed; status: %d\n", request.status);
+ return -EFAULT;
+ }
+ }
+
+ sli_config_persistent_topology(&hw->sli, &param);
+
+ return rc;
+}
+
/**
* @page fc_hw_api_overview HW APIs
* - @ref devInitShutdown
diff --git a/sys/dev/ocs_fc/ocs_ioctl.c b/sys/dev/ocs_fc/ocs_ioctl.c
--- a/sys/dev/ocs_fc/ocs_ioctl.c
+++ b/sys/dev/ocs_fc/ocs_ioctl.c
@@ -612,7 +612,7 @@
return -EFAULT;
}
- req->result = ocs_mgmt_set(ocs, req->name, req->value);
+ req->result = ocs_mgmt_set(ocs, name, value);
break;
}
diff --git a/sys/dev/ocs_fc/ocs_mgmt.c b/sys/dev/ocs_fc/ocs_mgmt.c
--- a/sys/dev/ocs_fc/ocs_mgmt.c
+++ b/sys/dev/ocs_fc/ocs_mgmt.c
@@ -1807,6 +1807,11 @@
if (hw_rc != OCS_HW_RTN_SUCCESS) {
ocs_log_test(ocs, "Topology set failed\n");
result = 1;
+ } else {
+ // Set the persistent topology before port is online
+ hw_rc = ocs_hw_set_persistent_topology(&ocs->hw, topo, OCS_CMD_NOWAIT);
+ if (hw_rc != OCS_HW_RTN_SUCCESS)
+ ocs_log_err(ocs, "Set persistent topology feature failed: %d\n", hw_rc);
}
/* If we failed to set the topology we still want to try to bring
diff --git a/sys/dev/ocs_fc/ocs_xport.c b/sys/dev/ocs_fc/ocs_xport.c
--- a/sys/dev/ocs_fc/ocs_xport.c
+++ b/sys/dev/ocs_fc/ocs_xport.c
@@ -371,6 +371,36 @@
return 0;
}
+/**
+ * @brief Initialize link topology config
+ *
+ * @par Description
+ * Topology can be fetched from mod-param or Persistet Topology(PT).
+ * a. Mod-param value is used when the value is 1(P2P) or 2(LOOP).
+ * a. PT is used if mod-param is not provided( i.e, default value of AUTO)
+ * Also, if mod-param is used, update PT.
+ *
+ * @param ocs Pointer to ocs
+ *
+ * @return Returns 0 on success, or a non-zero value on failure.
+ */
+static int
+ocs_topology_setup(ocs_t *ocs)
+{
+ uint32_t topology;
+
+ if (ocs->topology == OCS_HW_TOPOLOGY_AUTO) {
+ topology = ocs_hw_get_config_persistent_topology(&ocs->hw);
+ } else {
+ topology = ocs->topology;
+ /* ignore failure here. link will come-up either in auto mode
+ * if PT is not supported or last saved PT value */
+ ocs_hw_set_persistent_topology(&ocs->hw, topology, OCS_CMD_POLL);
+ }
+
+ return ocs_hw_set(&ocs->hw, OCS_HW_TOPOLOGY, topology);
+}
+
/**
* @brief Initializes the device.
*
@@ -453,6 +483,13 @@
}
}
+ /* Setup persistent topology based on topology mod-param value */
+ rc = ocs_topology_setup(ocs);
+ if (rc) {
+ ocs_log_err(ocs, "%s: Can't set the toplogy\n", ocs->desc);
+ return -1;
+ }
+
if (ocs_hw_set(&ocs->hw, OCS_HW_TOPOLOGY, ocs->topology) != OCS_HW_RTN_SUCCESS) {
ocs_log_err(ocs, "%s: Can't set the toplogy\n", ocs->desc);
return -1;
diff --git a/sys/dev/ocs_fc/sli4.h b/sys/dev/ocs_fc/sli4.h
--- a/sys/dev/ocs_fc/sli4.h
+++ b/sys/dev/ocs_fc/sli4.h
@@ -794,7 +794,10 @@
#if BYTE_ORDER == LITTLE_ENDIAN
uint32_t :31,
ext:1; /** Resource Extents */
- uint32_t :24,
+ uint32_t :20,
+ pt:2,
+ tf:1,
+ ptv:1,
topology:8;
uint32_t rsvd3;
uint32_t e_d_tov:16,
@@ -2538,6 +2541,7 @@
#define SLI4_SET_FEATURES_ENABLE_MULTI_RECEIVE_QUEUE 0x0D
#define SLI4_SET_FEATURES_SET_FTD_XFER_HINT 0x0F
#define SLI4_SET_FEATURES_SLI_PORT_HEALTH_CHECK 0x11
+#define SLI4_SET_FEATURES_PERSISTENT_TOPOLOGY 0x20
typedef struct sli4_req_common_set_features_s {
sli4_req_hdr_t hdr;
@@ -2615,6 +2619,16 @@
#endif
} sli4_req_common_set_features_set_fdt_xfer_hint_t;
+typedef struct sli4_req_common_set_features_persistent_topo_param_s {
+#if BYTE_ORDER == LITTLE_ENDIAN
+ uint32_t persistent_topo:2,
+ topo_failover:1,
+ :29;
+#else
+#error big endian version not defined
+#endif
+} sli4_req_common_set_features_persistent_topo_param_t;
+
/**
* @brief DMTF_EXEC_CLP_CMD
*/
@@ -3228,6 +3242,10 @@
uint16_t rq_min_buf_size;
uint32_t rq_max_buf_size;
uint8_t topology;
+ uint8_t pt:4,
+ tf:1,
+ ptv:1,
+ :2;
uint8_t wwpn[8];
uint8_t wwnn[8];
uint32_t fw_rev[2];
@@ -3565,6 +3583,13 @@
return rc;
}
+static inline void
+sli_config_persistent_topology(sli4_t *sli4, sli4_req_common_set_features_persistent_topo_param_t *req)
+{
+ sli4->config.pt = req->persistent_topo;
+ sli4->config.tf = req->topo_failover;
+}
+
static inline uint16_t
sli_get_link_module_type(sli4_t *sli4)
{
@@ -3598,6 +3623,19 @@
return count;
}
+static inline bool
+sli_fcal_is_speed_supported(uint32_t link_speed)
+{
+ if ((link_speed == FC_LINK_SPEED_16G) ||
+ (link_speed == FC_LINK_SPEED_32G) ||
+ (link_speed >= FC_LINK_SPEED_AUTO_32_16)) {
+ ocs_log_err(NULL, "unsupported FC-AL speed (speed_code: %d)\n", link_speed);
+ return FALSE;
+ }
+
+ return TRUE;
+}
+
/**
* @brief Common Create Queue function prototype
*/
@@ -5569,6 +5607,8 @@
extern int32_t sli_xmit_els_rsp64_wqe(sli4_t *, void *, size_t, ocs_dma_t *, uint32_t, uint16_t, uint16_t, uint16_t, uint16_t, ocs_remote_node_t *, uint32_t, uint32_t);
extern int32_t sli_requeue_xri_wqe(sli4_t *, void *, size_t, uint16_t, uint16_t, uint16_t);
extern void sli4_cmd_lowlevel_set_watchdog(sli4_t *sli4, void *buf, size_t size, uint16_t timeout);
+extern bool sli_persist_topology_enabled(sli4_t *sli4);
+
/**
* @ingroup sli_fc
diff --git a/sys/dev/ocs_fc/sli4.c b/sys/dev/ocs_fc/sli4.c
--- a/sys/dev/ocs_fc/sli4.c
+++ b/sys/dev/ocs_fc/sli4.c
@@ -764,6 +764,63 @@
return sizeof(sli4_fw_initialize);
}
+/**
+ * @ingroup sli
+ * @brief update INIT_LINK flags with the sli config topology.
+ *
+ * @param sli4 SLI context pointer.
+ * @param init_link Pointer to the init link command
+ *
+ * @return Returns 0 on success, -1 on failure
+ */
+static int32_t
+sli4_set_link_flags_config_topo(sli4_t *sli4, sli4_cmd_init_link_t *init_link)
+{
+
+ switch (sli4->config.topology) {
+ case SLI4_READ_CFG_TOPO_FC:
+ // Attempt P2P but failover to FC-AL
+ init_link->link_flags.enable_topology_failover = TRUE;
+ init_link->link_flags.topology = SLI4_INIT_LINK_F_P2P_FAIL_OVER;
+ break;
+ case SLI4_READ_CFG_TOPO_FC_AL:
+ init_link->link_flags.topology = SLI4_INIT_LINK_F_FCAL_ONLY;
+ return (!sli_fcal_is_speed_supported(init_link->link_speed_selection_code));
+
+ case SLI4_READ_CFG_TOPO_FC_DA:
+ init_link->link_flags.topology = FC_TOPOLOGY_P2P;
+ break;
+ default:
+ ocs_log_err(sli4->os, "unsupported topology %#x\n", sli4->config.topology);
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * @ingroup sli
+ * @brief update INIT_LINK flags with the persistent topology.
+ * PT stores value in compatible form, directly assign to link_flags
+ *
+ * @param sli4 SLI context pointer.
+ * @param init_link Pointer to the init link command
+ *
+ * @return Returns 0 on success, -1 on failure
+ */
+static int32_t
+sli4_set_link_flags_persistent_topo(sli4_t *sli4, sli4_cmd_init_link_t *init_link)
+{
+ if ((sli4->config.pt == SLI4_INIT_LINK_F_FCAL_ONLY) &&
+ (!sli_fcal_is_speed_supported(init_link->link_speed_selection_code)))
+ return -1;
+
+ init_link->link_flags.enable_topology_failover = sli4->config.tf;
+ init_link->link_flags.topology = sli4->config.pt;
+
+ return 0;
+}
+
/**
* @ingroup sli
* @brief Write an INIT_LINK command to the provided buffer.
@@ -780,6 +837,7 @@
sli_cmd_init_link(sli4_t *sli4, void *buf, size_t size, uint32_t speed, uint8_t reset_alpa)
{
sli4_cmd_init_link_t *init_link = buf;
+ int32_t rc = 0;
ocs_memset(buf, 0, size);
@@ -805,41 +863,23 @@
return 0;
}
- switch (sli4->config.topology) {
- case SLI4_READ_CFG_TOPO_FC:
- /* Attempt P2P but failover to FC-AL */
- init_link->link_flags.enable_topology_failover = TRUE;
-
- if (sli_get_asic_type(sli4) == SLI4_ASIC_TYPE_LANCER)
- init_link->link_flags.topology = SLI4_INIT_LINK_F_FCAL_FAIL_OVER;
- else
- init_link->link_flags.topology = SLI4_INIT_LINK_F_P2P_FAIL_OVER;
-
- break;
- case SLI4_READ_CFG_TOPO_FC_AL:
- init_link->link_flags.topology = SLI4_INIT_LINK_F_FCAL_ONLY;
- if ((init_link->link_speed_selection_code == FC_LINK_SPEED_16G) ||
- (init_link->link_speed_selection_code == FC_LINK_SPEED_32G)) {
- ocs_log_test(sli4->os, "unsupported FC-AL speed %d\n", speed);
- return 0;
- }
- break;
- case SLI4_READ_CFG_TOPO_FC_DA:
- init_link->link_flags.topology = FC_TOPOLOGY_P2P;
- break;
- default:
- ocs_log_test(sli4->os, "unsupported topology %#x\n", sli4->config.topology);
- return 0;
- }
-
init_link->link_flags.unfair = FALSE;
init_link->link_flags.skip_lirp_lilp = FALSE;
init_link->link_flags.gen_loop_validity_check = FALSE;
init_link->link_flags.skip_lisa = FALSE;
init_link->link_flags.select_hightest_al_pa = FALSE;
+
+ //update topology in the link flags for link bring up
+ ocs_log_info(sli4->os, "bring up link with topology: %d, PTV: %d, TF: %d, PT: %d \n",
+ sli4->config.topology, sli4->config.ptv, sli4->config.tf, sli4->config.pt);
+ if (sli4->config.ptv)
+ rc = sli4_set_link_flags_persistent_topo(sli4, init_link);
+ else
+ rc = sli4_set_link_flags_config_topo(sli4, init_link);
+
}
- return sizeof(sli4_cmd_init_link_t);
+ return rc ? 0 : sizeof(sli4_cmd_init_link_t);
}
/**
@@ -3724,6 +3764,14 @@
}
sli4->config.topology = read_config->topology;
+ sli4->config.ptv = read_config->ptv;
+ if (sli4->config.ptv){
+ sli4->config.tf = read_config->tf;
+ sli4->config.pt = read_config->pt;
+ }
+ ocs_log_info(sli4->os, "Persistent Topology: PTV: %d, TF: %d, PT: %d \n",
+ sli4->config.topology, sli4->config.ptv, sli4->config.tf, sli4->config.pt);
+
switch (sli4->config.topology) {
case SLI4_READ_CFG_TOPO_FCOE:
ocs_log_debug(sli4->os, "FCoE\n");
@@ -4162,6 +4210,12 @@
return 0;
}
+bool
+sli_persist_topology_enabled(sli4_t *sli4)
+{
+ return (sli4->config.ptv);
+}
+
int32_t
sli_init(sli4_t *sli4)
{

File Metadata

Mime Type
text/plain
Expires
Sun, Jan 12, 11:56 AM (20 h, 1 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
15769100
Default Alt Text
D34425.id.diff (14 KB)

Event Timeline